1) self-tapping bolt
自攻螺栓
1.
Technical requirements for self-tapping bolts applied to auto and their stressed state were analyzed.
分析了汽车用自攻螺栓的受力状态及自攻螺栓的技术要求,依据汽车自攻螺栓的服役特征制定了相应的热处理工艺,研究分析了热处理工艺参数与产品性能之间的关系,提出了自攻螺栓的最佳热处理工艺参数。
2) tap bolt
带头螺栓,自攻螺栓
3) screw connection
自攻螺栓连接
1.
Researches on NAFC and LCFC plates and their screw connections with light-gauge steel members;
NAFC、LCFC板及其与轻钢龙骨自攻螺栓连接性能
4) bolt screwing machine
螺栓攻丝机
5) self-tapping screws
自攻螺钉
1.
Test program on the shear behavior of stressed skin diaphragm using profiled sheet connected by the self-tapping screws has been carried out.
通过对压型钢板采用自攻螺钉连接的受力蒙皮进行剪切性能的试验,探讨了这类蒙皮的破坏模式和抗剪极限承载力,研究了板型、连接件布置和檩条间距等因素对蒙皮抗剪性能的影响,介绍了《欧洲蒙皮设计建议》(简称EUR)中此类蒙皮的抗剪强度和抗剪刚度的简化计算公式。
6) self-tapping screw
自攻螺钉
1.
Pilot Production of Deep Cold-Working Self-tapping Screw of 304HC Stainless Steel;
304HC不锈钢深冷变形自攻螺钉的试制
2.
In China,profiled steel sheeting claddings are commonly crest-fixed to members with self-tapping screws in order to improve its waterproof performance.
为了满足防水要求,目前我国在蒙皮连接上广泛采用自攻螺钉在压型钢板的波峰处与构件相连的形式。
3.
Combined with practical construction,the author introduces the fixed form of color steel plate installation,lap joint of side and end,selection of self-tapping screw,and setting of ribbon skylight,illustrates the methods to install color steel plate,and points out the problems should be noticed in installation construction,in order to ensure construction quality.
结合施工实践,对彩钢板安装的固定方式、侧向和端部搭接、自攻螺钉的选用、采光带的设置等方面进行了介绍,并阐述了彩钢板的安装方法,指出了安装施工中需注意的问题,以保证施工质量。
补充资料：高强度螺栓连接的厂房钢结构
高强度螺栓连接的厂房钢结构
高强度螺栓连接的厂房钢结构
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条