1) reasonable line stiffness ratio
合理线刚度比
1.
Study on reasonable line stiffness ratio of framework beam and column based on optimization theory
基于优化原理的框架梁柱合理线刚度比研究
2) linear stiffness ratio
线刚度比
1.
Pushover analysis for hybrid frame of SRC column-steel beam based on linear stiffness ratio of beam to column
基于梁柱线刚度比的型钢混凝土柱-钢梁混合框架静力弹塑性分析
2.
The analysis makes clear that when considering the rigidity influence of upright column,the internal force of cover beam will be secondarily distributed so as to make the positive moment in the span decrease and the negative moment support increase,and this kind of effect is more obvious with the increment of linear stiffness ratio of the upright column and cover beam.
分析表明,当考虑立柱刚度影响时,盖梁内力将进行二次分配,致使跨中正弯矩减小、支点负弯矩增大,随着立柱与盖梁的线刚度比的增大,此种效应越显著。
3) Rigidity of linearity
线性刚度比
4) rational rigidity
合理刚度
1.
Determination of rational rigidity of shear building applied with seldomly encountered strong earthquake considering ductility of the structure;
考虑结构延性性能确定罕遇地震作用下多层剪切型结构合理刚度
2.
The Research of Rational Rigidity and Braces Appropriate Setting for Braced Frame Small Tall-Building with Concrete Filled Square Stell Tube Columns;
方钢管混凝土框架—支撑体系小高层住宅合理刚度及支撑合理布置的研究
6) ratio of column linear rigidity to beam one
柱梁线刚度比
1.
Based on the analysis of ratio of column linear rigidity to beam one,form of load,second moment and plastic hinge in column,this paper is intended to get some helpful advise for moment modulation design.
预应力框架弯矩调幅规律与连续梁相比有着自己的特点,通过对柱梁线刚度比、外荷载形式、次弯矩和柱铰可行性几个方面进行分析,希望可以对预应力框架弯矩调幅设计提供一点参考和帮助。
补充资料：比刚度
分子式：
CAS号：
性质：又称比刚度。材料的机械强度(通常指拉伸强度)与其相对密度之比值。单位为兆帕。用于比较不同材料在相同质量下的强度。塑料和增强塑料的比强度可以达到或远远超过金属材料，如钢材和硬铝制品。复合材料具有优异的比强度。
CAS号：
性质：又称比刚度。材料的机械强度(通常指拉伸强度)与其相对密度之比值。单位为兆帕。用于比较不同材料在相同质量下的强度。塑料和增强塑料的比强度可以达到或远远超过金属材料，如钢材和硬铝制品。复合材料具有优异的比强度。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条