说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 湿饱和
1)  wet saturated
湿饱和
1.
The coupled thermo-hygro physical model for wet saturated flow of hot water section in steam driving is set up.
建立了蒸汽驱热水驱替部分湿饱和流动热流耦合的物理模型,在其基础上得到包括温度方程、压力方程、饱和度方程、渗流速度方程等在内的数学模型,采用全隐式中心差分方法,得到温度场、压力场等的迭代公式,对某应用示例的数值模拟说明了其过程的热流耦合机制,并指出应对油藏实施有效的加热降黏措施,可同时提高原油采收率和采油速率。
2)  wet-saturated
湿化饱和
1.
Nitrogen reinjection and syngas wet-saturated are two important methods for the de-NOX of gas turbine in IGCC system.
氮气回注、燃料湿化饱和是整体煤气化联合循环系统(IGCC)中降低燃机NOX排放的2种重要方法,针对200 MW级IGCC系统设计,对IGCC系统中2种低氮燃烧方式进行计算和分析,从技术指标和经济性的角度阐述了2种方案的优缺点,并给出合理化建议。
3)  saturated humidity
饱和湿度
4)  wet saturator
湿饱和器
5)  wet saturated steam
湿饱和蒸汽
1.
Injected wet saturated steam moving override on top reservoir and fingering along high permeability zone have been the main problem of cyclic steam stimulation.
注入油层的湿饱和蒸汽向油层顶部超覆推进以及沿高渗透区域指进一直是蒸汽吞吐开采过程中的主要矛盾。
2.
Based on the flowing laws of steam in convergent nozzle,a calculation model for lifting characteristics of steam jet pump was established,and the wet saturated steam was taken as power fluid.
应用气液两相流理论与传热学原理,建立了蒸汽喷射泵采油井井筒和油套环空中流体流动及传热耦合模型,以渐缩式喷嘴中蒸汽流动规律为基础,建立了以湿饱和蒸汽为动力液的喷射泵举升特性方程,应用节点分析方法,以井下喷射泵出口为求解点,形成了一套完整的蒸汽喷射泵采油工艺参数设计方法。
6)  wet residue-saturated solution
湿渣-饱和液
补充资料:(C14-18-饱和、C16-18-不饱和)脂肪酸钾盐
CAS:68002-80-2
分子式:C14-18 and C16-18-Unsaturated alkylcarboxylic acid potassium salts

中文名称:(C14-18-饱和、C16-18-不饱和)脂肪酸钾盐;牛油脂肪酸钾皂

英文名称:Fatty acids, C14-18 and C16-18-unsatd., potassium salts
C14-18 and C16-18-Unsaturated alkylcarboxylic acid, potassiumsalt
fatty acids, c14-18 and c16-18-unsatd., potassiumsalts
Fatty acids,C14-18 and C16-18-unsatd.,potassium salts
C14-18 and C16-18-Unsaturated alkylcarboxylic acid,potassiumsalt
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条