1) Hopkinson tension bar
Hopkinson拉杆
1.
In order to explore the failure mechanism of the structures with adhesively-bonded single-lap joints,a Hopkinson tension bar technique was applied to investigate influences of adherent thickness,temperature and velocity (the maximum velocity at the end of the specimen) on the strength of this kind of joint.
为了探讨单搭接胶接接头结构的破坏机理,采用Hopkinson拉杆实验技术,研究了板厚、温度和速度(试样端部的最大速度)对单搭接胶接接头强度的影响。
2) SHTB
Hopkinson拉杆技术
3) split Hopkinson tensile bar
分离式Hopkinson拉杆
4) Hopkinson bar
Hopkinson杆
1.
Miniature-Hopkinson bar technique;
微型Hopkinson杆技术
2.
Determination of dynamic behavior of materials at elevated temperatures and high strain rates using Hopkinson bar;
确定材料在高温高应变率下动态性能的Hopkinson杆系统
3.
The CFRP and GFRP laminates with a crack on a single side are loaded under tensile impact by the apparatus of Hopkinson bar.
利用Hopkinson杆加载装置,对带有单边切口的炭纤维增强复合材料(CFRP)及玻璃纤维增强复合材料(GFRP)层板试件进行冲击拉伸加载实验。
5) split Hopkinson pressure bar
Hopkinson压杆
1.
According to the model of the pulse load produced by split Hopkinson pressure bar(SHPB) mechanism,the stress-strain curves were obtained by using ANSYS/LSDYNA finite element method,and the effect of the friction of the interface between the pressure bar and specimen and slenderness ratio of specimen on stress uniformity in specimen were discussed.
根据Hopkinson压杆试验装置产生压缩加载脉冲的力学模型,利用ANSYS/LSDYNA有限元显示动力学程序计算得到了试件在加载过程中的应力-应变曲线,并且和输入材料曲线做了比较,讨论了试件的长径比及试件与压杆之间的界面摩擦力对试件内部应力均匀性和对试件材料动态屈服应力的影响。
2.
The ConeCylinder Projectiles are applied in the split Hopkinson pressure bar experiments.
本文在分离式Hopkinson压杆系统中,探索了应用变截面锥形弹丸实现常应变率力学性能测试的实验方法,以及在较高应变率下实现动态卸载以获取材料的动态弹性模量的可行性。
6) Hopkinson pressure bar
Hopkinson压杆
1.
Design Criterion in Dynamic Fracture Control of Steel Constructions and Design for Hopkinson Pressure Bar;
钢结构防动载断裂设计准则及Hopkinson压杆的设计
2.
Dynamic fracture toughness(KId) of 12Cr1MoV steel at various temperatures is tested with Hopkinson pressure bar used to impact specimens and liquefied nitrogen and alcohol used to modulate experimental temperature.
采用Hopkinson压杆装置对试样冲击加载,完成了12Cr1MoV钢在不同温度冲击条件下动态断裂韧性的测试。
3.
In the present paper,a kind of pneumatically synchronous mechanism is used to the split Hopkinson pressure bar,the technique of high strain-rate loading for a sample at high temperature is introduced.
本文介绍了在分离式Hopkinson压杆装置上通过使用一种气动同步机构,实现对试样进行高温高应变率加载的技术。
补充资料:[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式:C16H16ClN3O3S
分子量:365.5
CAS号:26807-65-8
性质:暂无
制备方法:暂无
用途:用于轻、中度原发性高血压。
分子量:365.5
CAS号:26807-65-8
性质:暂无
制备方法:暂无
用途:用于轻、中度原发性高血压。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条