说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 断裂点作图
1)  Breakpoint mapping
断裂点作图
2)  breakpoint [英]['breɪk,pɔɪnt]  [美]['brek,pɔɪnt]
断裂点
1.
The Analysis of Distribution of the Chromosome Aberration Breakpoints from Medical Diagnostic X-ray Workers;
医用诊断X射线工作者染色体畸变断裂点分布的分析
2.
Through the analysis of factors which will effect breaking location of tensile testing of helical welding pipe,this article indicates breakpoint of tensile test shall locate in middle of sample gauge length,and also introduce the method to avoid breakpoint deviating the middle of gauge length.
通过对影响螺旋焊管拉伸试样断裂位置因素的分析,指出拉伸试样断裂点应位于试样标距中间,并介绍了试验中避免断裂点偏移标距中间的方法。
3.
Regions consist of equal region and nub region and equal region can be divided with the methods of Taisen triangle, trend surface, clustering and so on; The track of boundary points of nub regions is a circularity and nub region can be divided with the model of breakpoints combined with exercising on map.
均质区域可用泰森三角形、趋势面、聚类分析等方法进行区划 ;结节区域之间的分界点轨迹从理论上说是一个圆 ,在现实中可以用断裂点模型和图上作业相结合的方法进行区划 。
3)  selective cleavage
定点断裂
4)  break crossover point
断裂交点
1.
Approach on break crossover point diastrophism direction of break coal intersecting line drawing in complex structure area;
复杂构造区断煤交线绘制法中断裂交点错动方向的探讨
5)  Method of breakpoint
"断裂点"法
6)  balance point
断裂点
1.
In this article it defines the 11 main city s attractived region respectively by the theory of space in teraction and using the method of balance point of attractive scope according to the strength of every city in Hebei province.
依据空间相互作用理论 ,利用断裂点方法 ,根据河北省各城市的综合实力 ,确定了 1 1个省辖市各自的吸引范围 。
补充资料:闭式单点、双点压力机
代码:00413
设备名称:闭式单点、双点压力机
型号规格:公称力≥800kN
计量单位:台
主要参数内容
国际先进国内先进国内一般国内落后评定方法及说明
(一)加工精度
    参照GB10924-89、GB10933-89、JB5200-91
1、滑块下平面对工作台上平面的平行度(mm)
30%精度储备20%精度储备达到规定值大于规定值 
0.02+0.10/100×滑块下平面的被测长度
     
2、滑块行程对工作台上平面的垂直度
30%精度储备20%精度储备达到规定值大于规定值 
0.05+0.02/100×滑块行程长度
     
(二)结构性能
     
1、离合器、制动器接通率,当滑块行程次数≤16次/分时为70%,≤25次/分时为60%,≤45次/分时为50%
大于规定值10%大于规定值达到规定值达不到规定值 
2、液压超负荷保险装置、微调装置、吨位指示器
全部具有全部具有部分具有没有 
(三)噪声dB(A)
     
1、公称力≤400kN
≤85≤87≤88>88 
2、公称力>400kN
≤87≤88≤90>90 
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条