1) heat and moisture exchange efficiency
热湿交换效率
1.
In order to improve the heat and moisture exchange efficiency of spray chamber and reduce energy consumption,design of air-conditioning system,reconstruction of air condition equipments and energy-saving operation were studied through theoretical analysis and experimental methods.
为提高喷淋室热湿交换效率并降低系统能耗,通过理论分析和实验方法对空调系统设计、空调设备改造和空调系统节能运行等方面进行研究。
2) The efficiency of the humidity transfer
湿交换效率
3) Heat Exchange Rate
热交换效率
1.
Correction Test of Heat Exchange Rate of Water-jet Room;
喷水室热交换效率的修正试验
4) temperature and humidity exchange efficiency
温湿度交换效率
5) heat and humid exchange
热湿交换
1.
Through analyzing influence of temperature of absorbent liquid in wet flue gas desulfurization process by heat and humid exchange, this article raises that lowing temperature of absorbent liquid is advantaged to SO 2 removal and provides some advices.
通过热湿交换原理 ,对石灰湿法烟气脱硫工艺过程中的吸收液温度的影响进行了分析 ,指出降低吸收液温度有利于脱硫效率的提高 ,并提出一些建议。
6) heat and moisture transfer
热湿交换
1.
Field test on heat and moisture transfer performance of tailrace tunnel ventilation in a hydropower station;
水电站无压尾水洞引风热湿交换特性的现场测试
2.
Theoretical study and application of heat and moisture transfer processes of tailrace tunnel ventilation in hydropower stations;
水电站无压尾水洞引风热湿交换过程的理论研究与应用
3.
Based on heat and moisture transfer theory,the lumped parameter prediction model of heat and moisture transfer between air and tailrace water,air and tailrace tunnel surface is established by analyzing the performance of heat and moisture transfer process of tailrace tunnel ventilation.
在水-空气热湿交换理论基础上,通过分析无压尾水洞引风热湿交换过程的特点,建立了无压尾水洞内空气与尾水、空气与洞壁之间的热湿交换集总参数模型,得出了无压尾水洞内沿程空气参数的解析解,并应用模型试验与现场测试对预测模型进行了验证。
补充资料：增湿效率
分子式：
CAS号：
性质：水与空气在增湿器内若能充分接触，则空气离开时可以达到饱和。在绝热增湿器中空气的状态，在理论上可以沿绝热冷却线一直达到100%相对湿度线。实际上要作到此点并不经济，气体往往是未达到饱和便送出设备。实际的增湿量与理论上能够达到的增湿量之比，就是增湿效率。
CAS号：
性质：水与空气在增湿器内若能充分接触，则空气离开时可以达到饱和。在绝热增湿器中空气的状态，在理论上可以沿绝热冷却线一直达到100%相对湿度线。实际上要作到此点并不经济，气体往往是未达到饱和便送出设备。实际的增湿量与理论上能够达到的增湿量之比，就是增湿效率。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条