说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 铬刚玉浇注料
1)  Chrome-containing corundum castables
铬刚玉浇注料
2)  corundum castables
刚玉浇注料
1.
This kind of refractory castables have good flow characteristics and excellent mechanical properties,and their hot rupture strength is better than that of ultra-low cement bonded corundum castables.
硅溶胶结合刚玉浇注料具有良好的流动性和常温强度,其高温热态抗折强度高于水泥结合刚玉浇注料。
2.
Corundum castables specimens were prepared by stirring 70 wt% tabular corundum grains,26 wt% tabular corundum fines and ultra-fines alumina,3 wt% pure calcium aluminate cement,1 wt% water-reducing agent and appropriate amount of water,pouring in the mold of vacuum casting equipment,beginning to vibrate when the vacuum degree reached 0,-0.
按板状刚玉颗粒70%(w)、板状刚玉细粉和氧化铝微粉26%(w)、纯铝酸钙水泥3%(w)和减水剂1%(w),加适量水配制成刚玉浇注料,搅拌均匀后倒入真空浇注设备的模具中,分别于真空度为0、-0。
3)  Corundum-magnesia castable
刚玉-MgO浇注料
4)  Corundum based castables
刚玉基浇注料
5)  corundum castable
刚玉质浇注料
1.
Effect of nano-calcium carbonate addition on properties of corundum castable
纳米碳酸钙加入量对刚玉质浇注料性能的影响
6)  Mullite-corundum castables
莫来石-刚玉浇注料
1.
Mullite-corundum castables were prepared with sintered mullite(w(Al2O3)>45%),fused mullite(w(Al2O3)>70%),corundum(w(Al2O3)>99%),α-Al2O3 micropowder(w(Al2O3)>99.
0%)等为主要原料,制备了莫来石-刚玉浇注料试样,经110℃24 h、1 000℃3 h和1 400℃3 h处理,研究了ρ-Al2O3加入量(w)分别为1%、2%、3%、4%和5%对莫来石-刚玉浇注料性能的影响。
2.
Mullite-corundum castables for desulphurizing lance were prepared using mullite M45(10~5 mm,5~3 mm),fused mullite(3~1 mm,≤1 mm)as aggregates,and corundum powder(≤0.
07μm)作基质,制备了脱硫枪用莫来石-刚玉浇注料,并分别研究了SiO2微粉加入量(分别为2%、3%、4%、5%)和Al2O3微粉加入量(分别为2%、4%、6%)对浇注料体积密度、显气孔率、强度、烧后永久线变化率、抗热震性和抗渣性的影响。
补充资料:不锈钢纤维增强耐火浇注料


不锈钢纤维增强耐火浇注料
stainless steel fibers reinforced castable refractories

韧性和抗震性能明显提高。 根据不锈钢纤维含铬、镍等元素不同,钢纤维分为“502”、“310”、“330”等不同的牌号。金属铬含量增加可提高钢纤维的抗氧化性能,金属镍含量增加可提高钢纤维的高温韧性和机械强度。不同品种的不锈钢纤维对耐火浇注料性能的影响见图。不锈钢纤维增强耐火浇注料的技术性能见表。 7厂-一一-----一-------------一--一门 荟12{ 娜、’}了/.} 豁}”一} 车{。~、、~一一} 侣_}‘、—尹/沪) 鸳,…_!月卜卜汁‘一叮{ 川}、l‘只、n 加热温工之r 不同品种的不锈钢纤维对耐火浇注料 加热后抗折强度的影响 1一不加钢纤维.2一加入302钢纤维.3一加入310钢纤维; 4一加入330钢纤维钢纤维对耐火浇注料技术性能的影响止 应用不锈钢纤维增强耐火浇注料已大量应用于轧钢加热炉炉底水管包扎、加热炉炉辊(见彩图插页第19页)、均热炉炉盖衬、锻造炉内衬、出铁沟沟盖衬、出钢槽衬等部位,使用寿命比普通耐火砖或耐火烧浅料高2一5倍,具有显著经济技术效果。 (张炳根)buxiugangx旧nwe!zengqiang naihuo Jiaozhuliao不锈钢纤维增强耐火浇注料(stainless steelfibers reinforeed eastable refraetories)以铝酸盐水泥作为结合剂,与耐火骨料、粉料、外加剂和不锈钢纤维配制的可浇注耐火材料。(见衬火浇注抖)钢纤维含量为0.6%~2.5%。这种浇注料具有高温下整体性好、耐磨性和抗热震性强等特点,适用于高温下有机械震动、热冲击、磨损等特殊部位。按其选用的骨料材质可分为粘土质、高铝质、硅质、镁质等多种不锈钢纤维增强耐火浇注料。 性能一般炉体内衬在使用时均存在高、中、低3个温度区域,如用耐火浇注料筑造炉衬,则往往在低温区与高温区之间形成一个强度薄弱区,不锈钢纤维在这个区域起着显著的增强作用,将炉衬内外连成一体,延迟了炉衬的开裂,即使开裂后也可以紧紧地把裂缝两侧的炉衬拉紧而不致过早地脱落。不锈钢纤维对炉衬高温工作区也有增强作用,主要是提高了浇注料的韧性、抗机械冲击性能和抗热震性,因此可以提高炉衬整体使用寿命。随着钢纤维含量的增加,耐火浇注料的
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条