1) Contact riser
触点冒口
2) knife edge contact
刀口触点
3) Feeder
[英]['fi:də(r)] [美]['fidɚ]
冒口
1.
The common foundry methods for nodular iron castings with medium/ small size and their design were introduced including:process characteristics o f nodular iron;types of gating systems ,their choice and design;sorts of feed ers,their principles and choice;feeder design with modulus method.
介绍日本中、小球墨铸铁件的常用工艺以及设计方法,包括:球墨铸铁的工艺特点;浇注系统的形式和选择;浇注系统的设计方法;冒口的种类和原理,选用方法,以及用模数法设计冒口的方法。
2.
By properly determining the dimensions of the feeder and its neck according to the principle of pressure-controllable feeder to control the inner pressure of casting,the shrinkageless casting was obtained,and the process yield of the casting was increased.
根据可控压力冒口原理,选择适当的冒口和冒口颈尺寸,控制铸件内部压力,获得无缩松缺陷的铸件,并提高了铸件的工艺出品率。
3.
This article discusses balance compencation in casting,and researches feeding mechanism and process,finds that the point of the method is usage of extra pressure on feeder metal which comes from special pressure machine.
介绍了平衡补缩铸造方法 ,并对其补缩机理和补缩过程进行了研究 ,指出平衡补缩铸造方法的关键在于采用专用压力机对冒口金属施加足够大的外加压力。
4) Riser
[英]['raɪzə(r)] [美]['raɪzɚ]
冒口
1.
Elimination of Shrinkage on the Ring Carrier Casting of Nodular Iron with Combined Feeding of Gating System and Riser;
浇注系统和冒口联合补缩消除球铁镶圈铸件缩孔缺陷
2.
Design of Riser Deviating from Hot-spot on the Steel Casting;
铸钢件冒口离开热节工艺设计
3.
Improvement of Riser’s Design and Annealing Technology for the Large Scale Tread of Cast-Steel;
铸钢大型履带板冒口设计及退火工艺的改进
5) contact
[英]['kɔntækt] [美]['kɑntækt]
接触，接点，接头，触点;接触器，接口;接触面，接触界面
6) offense
[英][ə'fens] [美][ə'fɛns]
n.冒犯，触怒
补充资料：触点
触点
touch spot
触点(t。ueh spot)皮肤上接受机械刺激产生触觉的部位，因呈点状分布而称触点。在有毛发的部位，触觉感受器是毛发感受器，在无毛发的部位是迈斯纳小体。巴西尼小体是与压觉有关的感受器。触点的数量在身体的不同部位是不同的，一般是运动能力强的部位触点多些，如拇指的触点多于手背的。 (高云鹅撰林仲贤审)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条