1) failure simulation analysis
失效仿真分析
1.
Based on this, the theories and methods of urban rail transit network\'s failure simulation analysis were studied.
首先通过引入复杂网络的相关特征指标,介绍了城市轨道交通路网的复杂网络特征;然后,设计了轨道交通网络仿真分析模型和路网连通可靠性评价指标,并以此为基础研究了轨道交通路网的失效仿真分析理论和方法;最后,以上海市2020年远景规划路网为例,标定了其网络类型,并对该路网的连通可靠性进行了仿真分析研究。
2) failure simulation
失效仿真
1.
Disscusion on failure simulation analysis and nanocomposite enhanced technology of renovation tire;
翻新轮胎失效仿真分析与纳米复合强化技术探讨
2.
The finite element failure simulation research of tyres is achived to their main failure form.
针对轮胎的主要失效形式,利用有限元法进行了失效仿真研究,主要进行了应力、应变及位移状况的分析,并对轮胎的寿命进行了预测。
3) simulation analysis
仿真分析
1.
Simulation analysis of the high-temperature superconducting linear induction motor based on ANSYS;
基于ANSYS的高温超导直线感应电机仿真分析
2.
The modeling and simulation analysis of the three-level STATCOM;
三电平STATCOM的建模和仿真分析
3.
Deformation numerical simulation analysis of stiffened metal diaphragm for positive expulsion tank;
锥柱形加筋金属膜片变形的数值仿真分析
4) Simulation
[英][,sɪmju'leɪʃn] [美]['sɪmjə'leʃən]
仿真分析
1.
Simulation Analysis of the Total Process for Clad Materials Connecting Rod Thermal Die Forging and Die Lifetime Pridiction;
层状材料连杆热锻模锻压全过程仿真分析及模具寿命预测
2.
The Application of Multilayer Simulation in the Improvement of Manufacturing Process;
多层次仿真分析方法在制造流程改善中的应用研究
3.
Finite element analysis and simulation on stress of cylindrical spur gear;
基于ANSYS的直齿圆柱齿轮应力仿真分析
5) simulation and analysis
仿真分析
1.
Dynamic simulation and analysis of pipes of air conditioners;
空调配管动力学仿真分析
2.
Kinematic simulation and analysis of the double wishbone independent suspension by using the software ADAMS;
基于ADAMS双横臂独立悬架的运动学仿真分析
3.
The simulation and analysis of thermal effect in Xiaolangdi divertion tunnel during construction;
小浪底工程泄洪洞衬砌施工期温变效应的仿真分析
6) simulating analysis
仿真分析
1.
The application in the Lianyuan Steel PL-TCM,composition, control, working principle and simulating analysis of the CPC systems are presented in the paper.
文章阐述了CPC系统的应用,装置组成、工作原理、控制原理及模拟仿真分析。
2.
In accordance with the features of materials,construction and changes of temperature and stress of RCC,simulating analysis method as well as its present development and specific requirement are introduced.
本文从碾压混凝土的材料特性、施工特点、温度场温度应力的变化特点入手,介绍了碾压混凝土仿真分析方法、目前进展、具体要求和应注意的问题,结合几个工程总结了碾压混凝土重力坝、拱坝的分缝方式,降低浇筑温度、水管冷却、表面保温、斜层碾压等温控措施,采用微膨胀混凝土、提高材料抗裂性能等碾压混凝土坝的温控防裂措施。
3.
A mould standard parts library is constructed by integration of SolidWorks,VB and Access on the platform of SolidWorks software,which provides a convenient way of simulating analysis of mould structure.
以SolidWorks软件为平台,将以SolidWorks、VB及Access结合建立的模具标准件库与可以方便地对所设计的模具结构进行仿真分析及有限元分析的Ansys相结合,形成一种进行模具的动态设计和优化的CAD/CAE模具设计集成环境。
补充资料：失效
失效
物质失去（指某一制品）效力或原作用，如过期和保存不善使药物失效。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条