1) 3003 aluminum alloy sheet
3003铝合金板
1.
The paper is to solve the problem of the coarse grain occurred in the recrystallization annealing process of the 3003 aluminum alloy sheet.
为了解决3003铝合金冷轧板进行再结晶退火时出现粗大晶粒的问题,利用光学显微镜观察在同一温度下退火,随着保温时间的延长3003铝合金板组织的变化情况,确定了3003铝合金板的最佳退火保温时间。
2) 3003 aluminum alloy foil
3003铝合金箔板
1.
In this thesis, the micro tensile properties of micro specimen of 3003 aluminum alloy foil are studied.
本文通过单向拉伸试验研究了3003铝合金箔板微小试样机械性能的尺寸效应,并且通过模拟和实验相结合方法研究了3003铝合金箔板微圆筒拉深成形工艺,得到了最小直径为1mm的成形质量良好的微圆筒拉深件。
3) 3003 aluminium alloy
3003铝合金
1.
Countermeasure and analysis about surface streak after corrosion 3003 aluminium alloy foil produced by cast-rolling stock;
铸轧坯生产3003铝合金箔腐蚀后表面条纹的分析与对策
2.
Effect of laser-texturing of cold roll on texture and mechanical properties of 3003 aluminium alloy
激光毛化对3003铝合金织构及性能的影响
3.
The cylindrical compression tests was carried out by using Gleeble 1500 system,the flow stress feature of 3003 aluminium alloy under hot deformation was investigated under the condition of temperature 300~500℃,strain rate 0.
采用Gleeble-1500热模拟机进行圆柱体压缩实验,研究了3003铝合金在变形温度为300～500℃、应变速率为0。
4) 3003 aluminium-manganese alloys
3003铝锰合金
1.
The microstructure and mechanical properties of as-cast and homogenized 3003 aluminium-manganese alloys grain-refined by Ti addition using different methods were investigated by SEM and EDS.
用SEM和EDS等方法研究了细晶铝锭熔铸的3003铝锰合金以及Al-10Ti中间合金、Al-5Ti-1B中间合金细化的3003铝锰合金铸态及均匀化处理状态的组织和力学性能。
5) 3003 aluminium alloy foil
3003铝合金箔
6) 2024/3003 aluminum alloy
2024/3003铝合金
1.
High temperature annealing of 2024/3003 aluminum alloy
2024/3003铝合金的高温退火研究
补充资料：[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式：C16H16ClN3O3S
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条