1) self maintaining incineration
自持焚烧
1.
Then according to the treatment technics of the self maintaining incineration,it is also listed more detailed proportions of equipment investment,direct operating costs and total operating cost.
为进一步降低污泥焚烧处理成本,先对污泥流化床焚烧处理作了简单的工艺分类与对比,并针对"自持焚烧"处理工艺,列出了较为详细的设备资金投入比重、直接运行成本和运行总成本,进而提出了推广该工艺技术降低成本的途径是对污泥进行预处理、提高设备国产化水平和开发应用多样化技术。
2) self-ignition and burn
自燃焚烧
3) incineration
[英][in,sinə'reiʃən] [美][ɪn,sɪnə'reʃən]
焚化;焚烧
4) Combustion
[英][kəm'bʌstʃən] [美][kəm'bʌstʃən]
焚烧
1.
Progress in bio-fuel combustion in circulating fluidized bed boiler;
循环流化床锅炉焚烧生物质燃料的研究进展
2.
Research of integrating wet sludge drying with combustion in circulating fluidized bed;
湿污泥循环流化床干化焚烧一体化研究
3.
The effects of gas flow rate,combustion temperature and different ratios of steam on chlorine removal from medical wastes were examined on medical wastes incineration process.
通过研究不同气氛、不同时间下医疗废物中氯的析出变化,考察了气体流速、焚烧温度和不同比例的水蒸气对医疗废物中氯析出的影响。
5) burn
[英][bɜ:n] [美][bɝn]
焚烧
1.
Based on an analysis of fuel characteristics and combustion mechanisms of straw residues from paper mills,a burning system for straw residues was designed,and technical measures that must be taken in the design of residues feeding system,burning equipment,heating surfaces and flue gas cleaning system were proposed.
在分析麦草造纸行业废弃物的燃料性质和燃烧机理的基础上,设计了麦草废弃物的焚烧系统,并提出了其进料系统、燃烧设备、受热面及烟气处理系统等设计中应采取的措施。
2.
Utilizing boiler waste gas for vaporization and concentration of waste water,burning of offal,the method not only deal with waste water skillfully,but also depress boiler dust efficiently.
先用废烟气蒸发浓缩 ,再焚烧 ,既巧妙处理了废水 ,又降低了锅炉烟尘 ,是一种低成本、低耗能以废治废双达标的方
6) burning
[英]['bɜ:nɪŋ] [美]['bɝnɪŋ]
焚烧
1.
To measure PAHS in the off-gas by burning activated carbon waste gas by gas chromatograph;
气相色谱法测定活性炭废气焚烧尾气中的多环芳烃
2.
An implementation study on burning medical wastes in a centralized disposal manner in Quanzhou City;
泉州市医疗废物集中焚烧处理的实施研究
3.
The burning and smelting of gold-loaded carbon;
载金炭焚烧及治炼的生产实践
补充资料：自燃点和自燃温度
分子式：
CAS号：
性质：又称自燃点和自燃温度。在规定条件下，可燃物质不需外来火源即发生燃烧的最低温度。中国规定气体、蒸气危险物质按引燃温度分为6组：引燃温度T>450℃为T1组、300℃<T≤450℃为T2组、200℃<T≤300℃为T3组、135℃<T≤200℃为T4组、100℃<T≤135℃为T5组。85℃<T≤100℃为T6组。粉体、纤维危险物质按引燃温度分为3组：引燃温度T>270℃为Tll组、200℃<T≤270℃为T12组、140℃<T≤200℃为T13组。
CAS号：
性质：又称自燃点和自燃温度。在规定条件下，可燃物质不需外来火源即发生燃烧的最低温度。中国规定气体、蒸气危险物质按引燃温度分为6组：引燃温度T>450℃为T1组、300℃<T≤450℃为T2组、200℃<T≤300℃为T3组、135℃<T≤200℃为T4组、100℃<T≤135℃为T5组。85℃<T≤100℃为T6组。粉体、纤维危险物质按引燃温度分为3组：引燃温度T>270℃为Tll组、200℃<T≤270℃为T12组、140℃<T≤200℃为T13组。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条