1) rapid hot pressing
快速热压
1.
Compact MgB2 bulks as superconductor were successfully prepared by rapid hot pressing process in high-purity flowing Ar protective atmosphere.
采用快速热压烧结技术,在流动的高纯氩气保护氛围下,成功地制备出致密MgB2块材。
2) rapid hot-pressing
快速热压法
1.
Thermoelectric properties of rapid hot-pressing N-type (Bi_2Te_3)_(0.9)(Ag_xBi_(2-x)Se_3)_(0.1) synthesized from doping Bi_2Te_3 nanocrystals
N型(Bi_2Te_3)_(0.9)(Ag_xBi_(2-x)Se_3)_(0.1)热电材料的快速热压法制备及性能表征
3) rapid hot-pressing
快速热压烧结
1.
In the present study, bulk nanostructured WC-Co cermets were prepared by high energy ball milling and rapid hot-pressing; the physical and mechanical properties as well as microstructure of the sintered bulk materials were also measured.
采用高能球磨 快速热压烧结工艺制备了纳米晶粒WC Co硬质合金块体 ,并对合金的物理、力学性能及微观组织进行了分析测试。
2.
The polycrystalline samples for measurement, with relative densities all above 90%, were prepared by rapid hot-pressing process.
所得合金锭经过高能球磨制成微米级的超细合金粉,再通过快速热压烧结制备测试用的多晶试样,所有试样的相对密度均达到90%以上。
4) rapid heating
快速加热
1.
For a kind of low carbon micro-alloyed steel,a thermal simulation test was conducted with samples of F+B+P microstructure and the effects of its cold deformation at room temperature on the distribution,size and composition of precipitates were investigated via a technological process for rapid heating and short holding time.
实验用试样的原始组织为铁素体、珠光体加少量贝氏体,采用一种快速加热短时保温的工艺方法探讨室温变形的作用。
2.
During the rapid heating for limestone calcination,a new platinum-membrane reactor(PMR),which accurately weighs the sample and acquires temperature of particles,was used.
在加热过程中,应用一种新型的快速加热装置——铂膜反应器,及时准确地获得样品质量和颗粒温度,来研究石灰石的煅烧分解,并对石灰石加热速率高达750℃/s下的分解反应特性,及其对分解后产生的氧化钙吸收CO2和脱硫的化学反应特性进行了研究。
3.
Based on studying the phase diagram of the Ti-Al binary system, the microstructure types and continuous cooling transformations of the TiAl-based alloys, and the heat treatment practices and effects, a new rapid heating cyclic heat treatment technology with the characteristics of rapid heating, holding in single α phase region, short holding time and relatively slow cooling was proposed.
在研究Ti Al二元相图及合金元素的影响、TiAl基合金显微组织类型与连续冷却转变、热处理实践及效果的基础上 ,提出了快速加热循环热处理新工艺 ,该工艺的特点是 :加热速度快 ,单相区保温 ,保温时间短 ,冷却速度相对较慢。
5) Fast pyrolysis
快速热解
1.
Experimental research on biomass fast pyrolysis with discontinuous feed for production of bio-oil;
间歇式给料的生物质快速热解制油的实验研究
2.
A combination process of straw steam-explosion and solid-state fermentation with fast pyrolysis for producing liquid fuels;
秸秆蒸汽汽爆、固态发酵处理结合快速热解制液体燃料
3.
The configuration analysis of the adsorption isotherm of nitrogen in low temperature with the lignite char produced under fast pyrolysis;
快速热解褐煤焦的低温氮吸附等温线形态分析
6) flash pyrolysis
快速热解
1.
Effects of temperature on products of flash pyrolysis of lignite in a spouted-entrained bed;
喷动载流床中温度对霍林河褐煤快速热解产物的影响
2.
Combining with the superiority of bubbling fluid bed with shallow bed depth and the characteristics of biomass pyrolysis, the fluid bed pyrolysis reactor of biomass flash pyrolysis was designed and manufactured to implement experiment of producing biomass pyrolysis oil by biomass flash pyrolysis.
根据浅床层鼓泡流化床的特点以及生物质的热解特性,研制出生物质快速热解的流化床热解反应器,并进行生物质快速热解制取生物质油的试验研究。
3.
In this paper,the research status and progress of coal pyrolysis and utilization have been reviewed,technologies of coal flash pyrolysis,oriented catalytic conversion and producing valuable chemicals from coal pyrolysate were focused.
在对国内外煤热解研究现状分析的基础上,对煤的快速热解技术、定向催化转化技术和煤热解物制备化学品技术进行了探讨,提出了由煤热解物制备高价值化学品的新思路,并对煤热解及由煤热解物制高价值化学品的发展趋势和面临的一些问题提出了看法与建议。
补充资料:快速
速度快的;迅速:~照相机ㄧ~炼钢ㄧ~行军 ㄧ~育肥。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条