1) optical-encoder
光电式编码器
2) photoelectric coder
光电编码器
1.
Application of photoelectric coder in sheared steel plate length measurement;
光电编码器在剪切钢板长度测量中的应用
2.
In order to adapt the development of the resistance welding technology and improve the automation of the resistance welding machine,an automatic thickness measurement device with the photoelectric coder and the PLC high-speed counter was studied based on the structure and application situation of the resistance welding machine.
为了适应电阻焊技术的发展,提高电阻焊机的自动化程度,针对电阻焊机的结构、应用场合,研究了一套基于光电编码器和PLC高速计数器的自动测厚装置。
3) photoelectric encoder
光电编码器
1.
Realizing Signal Processing for Photoelectric Encoder Based on TPU;
基于TPU实现的光电编码器信号处理
2.
Design of a programmable count circuit for photoelectric encoder;
一种光电编码器用可编程计数电路的设计
3.
Application of CAN bus technique to photoelectric encoders
CAN总线技术在光电编码器中的应用
4) Encoder
[in'kəudə]
光电编码器
1.
Design of Count Circuit of Encoder in CNC Machine Tool;
数控机床中光电编码器计数电路设计
2.
The high-compositive FPGA(filed programmable gate array) chip was used as the core to deal with the signal of the six encoders in real time.
研究了能够同时对多路光电编码器脉冲信号进行细分、计数以及传输的数据采集处理系统。
3.
Pulse generating circuit diagram for step motor and the azimuth measurement system in which encoder acts as the feedback sensor are mainly discussed.
为了满足微波暗室雷达天线的测试需求,实现了基于研华工业控制计算机的转台控制系统;介绍了系统的硬件组成,设计了步进电机驱动器脉冲发生电路,以光电编码器为位置传感器并结合A/D,D/A卡及DIO卡PCL722实现了转台的测角系统;为数据采集卡开发了设备驱动程序,基于此驱动程序开发了转台控制软件,可实现转台的指令输出和反馈数据的图形化显示;整个系统结构紧凑,抗干扰能力强,运行可靠;能在整个圆周范围进行测量,测角精度为0。
5) optical encoder
光电编码器
1.
Development of a linear foot switch with optical encoder;
使用光电编码器的线性脚踏控制器的研制
2.
Error compensation of optical encoder based on RBF network;
基于径向基函数网络的光电编码器误差补偿法
3.
According to the transverse failure principle, this paper analysed the procession of transverse failure inspection and designed a new type application of transverse failure inspection based on optical encoder and MCU.
应用光电编码器与单片机设计了一种新型的断带检测装置,实现断带检测的快速、准确性。
6) photoelectrical encoder
光电编码器
1.
The Data Acquisition System for Photoelectrical Encoders Based on FPGA
FPGA在光电编码器数据采集系统中的应用
2.
A method of designing a simple and low-cost interface of the incremental photoelectrical encoder which is used in low velocity system is provided in this paper.
介绍了低速增量式光电编码器接口的鉴向计数原理,以及实践过程中所要注意的问题,并通过实验验证了接口的可行性与适用范围。
3.
Aiming at requirement of the position detection in iron and steel industry,a photoelectrical encoder position detection sys-tem based on MSP430 is designed.
针对位置检测的需要,提出了一种光电编码器位置检测系统。
补充资料：光电对抗侦察(见光电对抗)
光电对抗侦察(见光电对抗)
electro-optical reconnaissance of electronic warfare
guangdian duikang zheneha光电对抗侦察(elee‘ro一op‘ical reconnais-sanee ofeleetronicwarfare)见光电对抗。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条