1) discrete time point processes
分立时间点处理
3) treating time
处理时间
1.
Molten Sn-15%Pb alloy, which was used as the test material, was treated with electric pulse for different treating time under the condition of 90℃ overheating.
结果表明:经电脉冲孕育处理后,Sn-15%Pb合金凝固组织发生了明显的变化,凝固组织中的富Sn初生相形态从树枝晶转变为颗粒状;与凝固组织的变化相对应,合金的凝固过程也发生了明显的改变,初生相形核的最低温度有较大幅度的提高;但随着电脉冲处理时间的延长,凝固组织中粒状晶的数量总体呈现出"少-多-少-多"的周期性变化规律;与之相对应,初生相形核温度的变化也随电脉冲孕育处理时间的延长呈现出周期性。
2.
The study was done on the endurance of Isochysis galbana Parke OA-3011 in N aClO solution for different concentration*effectual chlorite)and different treating time.
采用不同质量分数的次氯酸钠 ,以不同的处理时间对等鞭金藻 30 11进行耐受力研究。
4) treatment time
处理时间
1.
The effects of treatment time,power and the discharge distance on the hydroscopicity of the nonwoven fabric were determined through experiments.
通过实验得出了处理时间、功率以及放电间隙这3个参数对涤纶非织造布吸湿性的影响。
2.
The investigations show that,although the weak acidic condition of the liquor confer the relatively less damage to the PLA fiber,the significant damage still happened if treatment time was long enough.
结果表明,微酸性虽然是对PLA纤维强度损伤较小的条件,但随着处理时间的延长和处理温度的升高,同样会对PLA纤维产生非常明显的强度损伤。
3.
Lucerne seeds are treated by a certain electric field in a different time, the biological effect is tested including the effects of treatment time on germination percentage, weight of seedling and water content.
在一定电场强度下,对苜蓿种子处理不同时间,测定了不同处理时间对种子幼苗期的发芽率、幼苗重量以及含水量的影响,给出了生物效应与处理时间的关系。
6) time disposal
时间处理
1.
Considering the practical situations of an engine assembly shop, this paper presented a time disposal method for the production scheduling in the mode of make-to-order.
以某发动机厂装配生产车间为背景 ,讨论了面向订单生产 (MTO)方式下流水线装配生产计划过程中的时间处理。
补充资料：分立
1.分别独立。 2.分别制定。 3.分别设立。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条