1) stone materials grade match
石料级配
1.
To raise efficiency and economic benefits of stone materials grade matching in industrial equipment,an image processing method is proposed to inspect ratio of large and small stones in mixed stone materials and to regulate ratio of stone materials of coutinuous charging equipment.
为提高工业设备中石料级配的效率和经济性,文章提出了采用图像处理方法检测混合石料中大小石比例的思路,用于调节连续投料设备的石料配比。
2) aggregate grading
砂石级配;骨料级配
3) hoggin
['hɔɡiŋ]
级配砾石混合料
4) graded gravel
级配碎石
1.
On the Stuffing and Construction of Graded Gravel for Transition Zone in the High Speed Rail Bridge;
浅淡高速铁路桥涵过渡段级配碎石的填筑施工
2.
Through a great many of field experiment and comparison, we get economic, rational graded gravel and the mix ratio for bedding facing, work out a full set of constructional process plan, and quality control and check procedure.
根据大量的现场对比试验,优选出经济、合理的基床表层级配碎石材质及配合比,摸索出一套完整的施工工艺和质量控制检测程序。
5) graded broken stone
级配碎石
1.
The transition section graded broken stone construction technology;
过渡段级配碎石施工工艺
2.
The quality control points of graded broken stone foundation;
级配碎石基层质量控制要点
3.
Analysis of continuous dynamic monitoring on vibrating compaction process of graded broken stone;
级配碎石振动压实过程的连续动态监控分析
6) graded aggregate
级配碎石
1.
Characteristics of the modulus and distortion of the graded aggregate material;
级配碎石材料强度及塑性变形特性
2.
Working performance and evaluation index of fly-ash graded aggregates
粉煤灰级配碎石的施工和易性及其评价指标
3.
At the same time, the structure( 5cm asphalt pavement surface + 15cm graded aggregate.
在南非半刚性基层一般作为底基层,并且这种典型结构(5cm沥青混凝土+15cm级配碎石基层+25~40cm水泥稳定类底基层)在南非国家使用得非常广泛。
补充资料:ZHK系列真空进料快速混合机
工作原理
本机采用真空的方式加料,容器不断旋转,物料在内部得以混合完全。本机按GMP要求设计,安全、高效。
应用范围
医药、化工、食品、冶金等待业进行粉粒状物料的混合。
技术参数
规格/项目 | 总容积 | 工作容积 | 积料 | 投料转速 | 动力 | 回转高度 | 重量 |
L | L | kg | rpm | kw | mm | kg | |
0.05 | 50 | 20 | 12 | 25 | 0.4 | 900 | 260 |
0.15 | 150 | 65 | 40 | 22 | 0.55 | 1300 | 350 |
0.3 | 300 | 145 | 90 | 20 | 0.75 | 1700 | 600 |
0.5 | 500 | 210 | 130 | 18 | 1.5 | 1840 | 700 |
1 | 1000 | 425 | 250 | 15 | 3 | 2030 | 1800 |
1.5 | 1500 | 700 | 420 | 15 | 4 | 2300 | 2300 |
2 | 2000 | 800 | 480 | 14 | 5.5 | 2490 | 3400 |
3 | 3000 | 1250 | 750 | 13 | 5.5 | 2850 | 4250 |
4 | 4000 | 1850 | 1100 | 11 | 7.5 | 3200 | 5500 |
5 | 5000 | 2300 | 1400 | 8 | 7.5 | 4600 | 6000 |
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条