1) dissolution efficiency
溶出效率
1.
The difference of dissolution curves was compared by difference factor(f1) and dissolution efficiency(DE) methods.
通过差异因子(f1)和溶出效率法(DE)比较各溶出曲线的差异。
2) available extraction rate
有效溶出率
3) dissolution
[英][,dɪsə'lu:ʃn] [美]['dɪsə'luʃən]
溶出效果
1.
Preparation of Dragon’s blood solid dispersion and the study on their dissolutions;
龙血竭固体分散体的制备及其溶出效果的研究
4) Solubility
[英][,sɔlju'biliti] [美][,sɑljə'bɪlətɪ]
溶出率
1.
The influence of menstruum on solubility of protoberberinium alkaloids in the couple of Rhizoma Coptidis and Fructus Evodiae;
不同溶媒对黄连-吴茱萸药对中小檗碱型生物碱溶出率的影响
2.
Objective: To investigate the relationship between the solubility of Rhizoma Coptidis main chemical constituents and the proportion of Rhizoma Coptidis and Fructus Evodiae.
目的:考察黄连与吴茱萸按不同比例配伍时,黄连中主要化学组分溶出率的变化规律。
3.
Additionally, the couple of Rhizoma Coptidis and Fructus Evodiae was selected for investigation of the influence of the proportions of Rhizoma Coptidis and Fructus Evodiae and extraction menstruum on the solubility of the main chemical constituents.
本文以苦黄注射液为对象，对中药指纹图谱建立的方法学和中药色谱指纹图谱相似度计算方法进行了探索；以黄连-吴茱萸药对为对象，研究了配伍比例及提取方法对其中主要化学组分溶出率变化规律的影响。
5) dissolution rate
溶出速率
1.
Relationship between dissolution rate and bioavailability of paracetamol tablet;
对乙酰氨基酚片的溶出速率及生物利用度研究
2.
Study on the solid dispersion of rosiglitazone maleate and its dissolution rate;
马来酸罗格列酮固体分散体及其溶出速率
3.
Objective To prepare nifedipine solid dispersions and investigate their dissolution rate.
目的提高硝苯地平的体外溶出速率。
6) leaching rate
溶出率
1.
A preliminary analysis of influences of secondary reaction on leaching rate of alumina in sintering mixture;
二次反应对熟料中氧化铝溶出率的影响分析
2.
Soft Sensing for Ratio of Soda to Alumina and Leaching Rate Based on Intelligent Integrated Model and Its Application;
基于智能集成模型的苛性比值与溶出率软测量及应用研究
3.
The experiment results showed that the primary factors effecting on the leaching rate of impurity P and F from phosphate rock were the amount of dilute hydrochloric acid and the leaching reaction time.
实验结果表明:稀盐酸用量和浸取反应时间是影响磷矿石中磷及含氟杂质溶出率的关键因素,活性硅和氯化钠用量对产品质量有重要影响。
补充资料：催化剂表面有效利用率
分子式：
CAS号：
性质：将通常测定的反应速度与消除内扩散后所测定的速度之比，定义为催化剂表面有效利用率。用以表征催化反应受颗粒内扩散控制的程度。工业上有许多反应是在内扩散区进行的，其催化剂的表面利用率差别很大。如苯酚在Ni催化剂上加氢时表面有效利用率为72%。使用5mm合成氨催化剂颗粒时，表面有效利用率为72%，而用2mm颗粒时，接近100%，即反应在动力学区进行。
CAS号：
性质：将通常测定的反应速度与消除内扩散后所测定的速度之比，定义为催化剂表面有效利用率。用以表征催化反应受颗粒内扩散控制的程度。工业上有许多反应是在内扩散区进行的，其催化剂的表面利用率差别很大。如苯酚在Ni催化剂上加氢时表面有效利用率为72%。使用5mm合成氨催化剂颗粒时，表面有效利用率为72%，而用2mm颗粒时，接近100%，即反应在动力学区进行。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条