1) hydroxyl-terminated polyisoprene
端羟基聚异戊二烯
1.
Synthesis and characterization of hydroxyl-terminated polyisoprene and its copolymer
端羟基聚异戊二烯及其共聚物的合成与表征
2) hydroxy-terminated polyisobutene
端羟基聚异丁烯
3) hydroxyl-terminated polybutadiene
端羟基聚丁二烯
1.
Synthesis and performance study of hydroxyl-terminated polybutadiene modified alkyd resin;
端羟基聚丁二烯改性醇酸树脂的合成与性能研究
2.
Reaction kinetics of synthesis of epoxidized hydroxyl-terminated polybutadiene;
合成环氧化端羟基聚丁二烯的反应动力学
3.
Preparation of epoxidized hydroxyl-terminated polybutadiene by acetic acid peroxide in-situ;
用过氧乙酸原位法合成环氧化端羟基聚丁二烯
4) HTPB
端羟基聚丁二烯
1.
FRIR ANALYSIS ON THE CURING PROCESS OF HTPB ADHESIVE SYSTEM;
红外光谱法测定端羟基聚丁二烯(HTPB)胶粘体系的固化度
2.
STUDY OF HTPB BY ~(13)C-NMR METHOD;
端羟基聚丁二烯(HTPB)的~(13)C-NMR研究
3.
Curing Kinetics of Hyperbranched Polyester(HBPE)/HTPB Polyurethane IPN by FT-IR;
超支化聚酯/端羟基聚丁二烯型聚氨酯互穿网络的固化动力学
5) Hydroxy-terminated Polybutadiene
端羟基聚丁二烯
1.
Characterization of Chain-Extending Hydroxy-terminated Polybutadiene by Maleic Anhydride;
马来酸酐扩链端羟基聚丁二烯表征
2.
The functionality distribution of hydroxy-terminated polybutadiene(HTPB) was determined by gel permeation chromatography(GPC).
用凝胶渗透色谱法(GPC)测定端羟基聚丁二烯(HTPB)官能度分布。
6) hydroxyl terminated polybutadiene
端羟基聚丁二烯
1.
Using hydroxyl terminated polybutadiene as prepolymer, Liquefaction modified 4,4′ methylenebis (phenyl isocyanate) as cross linking agent, BD and ED as chain extenders.
用端羟基聚丁二烯为原料、液化改性MDI为交联剂、BD或ED为扩链剂合成不同硬段结构的聚丁二烯聚氨酯弹性体 ,研究了扩链剂种类、用量等对弹性体性能的影响。
2.
The hydroxyl terminated polybutadiene (HTPB) was synthesized by free radical polymerization in higher pressure reactor, with H 2O 2(50% by weight) as initiator, alcohol as solvent.
采用质量分数为 5 0 %的工业双氧水为引发剂 ,乙醇为溶剂 ,丁二烯为单体 ,在不锈钢高压反应釜中进行自由基溶液聚合 ,合成了液体端羟基聚丁二烯。
3.
To reduce the mechanical sensitivity of cyclotetramethylene tetranitramine(HMX),hydroxyl terminated polybutadiene(HTPB) and toluene diisocyanate(TDI) are used to coat HMX by the method of phase separation.
为了降低奥克托今(HMX)的机械感度,以端羟基聚丁二烯(HTPB)和甲苯二异氰酸酯(TDI)为包覆材料,采用相分离法对HMX颗粒进行了表面包覆,制备了HTPB/HMX复合粒子。
补充资料：端羟基聚异丁烯
分子式：
CAS号：
性质：又称聚异丁烯橡胶。指每个大分子两端平均有两个或两个以上羟基的异丁烯同脂肪直链(或支链)二烯的共聚物。常温下为无色至淡黄色黏稠液体。通常将固体的异丁烯同脂肪直链(或支链)二烯的共聚物溶解在惰性溶剂中，用臭氧将共聚物主链上的双键裂解，使之转化为臭氧化物，再用强还原剂将臭氧化物破坏，转化为低分子量的端羟基聚异丁烯而制得。主要用于制造黏合剂和耐水解、防腐涂料等。
CAS号：
性质：又称聚异丁烯橡胶。指每个大分子两端平均有两个或两个以上羟基的异丁烯同脂肪直链(或支链)二烯的共聚物。常温下为无色至淡黄色黏稠液体。通常将固体的异丁烯同脂肪直链(或支链)二烯的共聚物溶解在惰性溶剂中，用臭氧将共聚物主链上的双键裂解，使之转化为臭氧化物，再用强还原剂将臭氧化物破坏，转化为低分子量的端羟基聚异丁烯而制得。主要用于制造黏合剂和耐水解、防腐涂料等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条