1) silicon-boron resin
硅硼树脂
1.
In the room temperature,a modified epoxy resin(I) prepared from CTBN and epoxy resin AG-80 was mixed proportionately as component A,with the modified epoxy resin(II) from the reaction between silicon-boron resin and bisphenol-A epoxy resin.
用端羧基丁腈橡胶(CTBN)与环氧树脂AG-80反应制得改性环氧树脂(I);以硅硼树脂与双酚A型环氧树脂反应得到改性环氧树脂(Ⅱ);将改性环氧树脂(I)和(II)按比例在室温下充分混匀为A组分,把固化剂、阻燃剂等混配成B组分,将A和B组分按不同配比均匀混合配成灌封材料,并以IR、拉力机等仪器分别对改性树脂、灌封材料进行结构及力学性能的测试表征。
2) boron-silicon-modified phenolics
硼硅改性酚醛树脂
1.
A kind of boron-silicon-modified phenolics resin, which was synthesized through chemical modification based on boric acid and polyorganosiloxane, was used to prepare the paper base laminate.
采用硼酸、有机硅预聚物对酚醛树脂进行化学改性，合成出硼硅改性酚醛树脂，然后与纸基复合制得硼硅改性酚醛树脂纸基层压板，最后在层压板上再复合硼硅改性酚醛泡沫制成复合结构吸声材料。
3) boron resin
硼树脂
4) boron phenolic resin
硼酚醛树脂
1.
Study on properties of boron phenolic resin/butadiene acrylonitrile rubber(NBR) ablative materials;
硼酚醛树脂/丁腈橡胶烧蚀材料性能研究
2.
In this course,boron phenolic resin and curing accelerator by custom-made were chosen as curing agents,nano-montmorillonite and sericite powder as fillers,adhesive can be served at 300℃for long period.
采用甲基苯基硅树脂对酚醛环氧树脂进行改性,硼酚醛树脂与自制固化促进剂作为固化剂,辅以纳米蒙脱土、绢云母粉作为填料,制备出一种能在300℃条件下长期使用的耐高温胶粘剂。
3.
A new train of thought of copolymerising modification of the boron phenolic resin was applied and a new resin contained allyl was synthesized through allyl phenol, phenol, boric acid and polyformaldehyde.
运用硼酚醛树脂共聚改性的新思路 ,利用烯丙基苯酚、苯酚、硼酸、多聚甲醛等合成出结构中含有烯丙基活性基团的可与其它含不饱和双键树脂 (或化合物 )发生共聚反应的新型硼酚醛树脂 ,表征了它们的物理性能和结构。
5) boron-phenolic resin
硼酚醛树脂
1.
Study on matrix ablative resistance adhesive for MoSi_2 modified epoxy resin/ boron-phenolic resin;
MoSi_2改性硼酚醛树脂／环氧树脂的耐烧蚀胶粘剂研究
2.
Effect of content of silica aerogel and boron-phenolic resin on properties of EPDM/NBR flexible insulation material;
白炭黑与硼酚醛树脂用量对EPDM/NBR柔性绝热层材料性能的影响
3.
Molecular weight,molecular weight distribution,and thermal loss of high char yield phenolic resin and Boron-phenolic resin were characterized and compared by GPC and TG.
本文采用GPC和TG对高残碳酚醛树脂(HCYPR)和硼酚醛树脂(BPR)的分子量及其分布、热失重特性进行了表征和对比。
6) boron-specific chelating resin
硼螯合树脂
补充资料：有机硅改性酚醛树脂
分子式：
CAS号：
性质：具有优良的耐热性、粘接性、耐烧蚀和消融隔热性。可加工成模塑粉，易成型加工，且有优良的电气性能和机械性能。由有机基三乙酰氧基硅烷与低分子量的酚醛树脂共缩聚来制取。用作高温粘接剂、航天飞行器表面消融防热涂层。树脂内加入玻璃纤维-石英粉等填料制成的模塑料在电器和电机行业获得应用。
CAS号：
性质：具有优良的耐热性、粘接性、耐烧蚀和消融隔热性。可加工成模塑粉，易成型加工，且有优良的电气性能和机械性能。由有机基三乙酰氧基硅烷与低分子量的酚醛树脂共缩聚来制取。用作高温粘接剂、航天飞行器表面消融防热涂层。树脂内加入玻璃纤维-石英粉等填料制成的模塑料在电器和电机行业获得应用。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条