1) carbon nano-tubes/carbon nano-fibers
纳米碳管/纳米纤维
2) carbon nanofibers/carbon nanotubes
纳米炭纤维/纳米碳管
1.
In order to select suitable catalyst from four metals(Fe、Co、Ni、Mo)to synthesize carbon nanofibers/carbon nanotubes on carbon fibers,by the impregnation-reduction method and chemical vapor deposition method were used four metal—salts separately as catalyst precursor,CO as carbon source,H_2 as reduction gas,N_2 as carrier gas.
为了选择合适的催化剂,来催化炭纤维生长纳米炭纤维/纳米碳管,分别以Fe、Co、Ni和Mo的金属盐为催化剂前驱体,H_2为还原气体,N_2为载气,采用浸渍—还原法在炭纤维表面制备纳米催化剂颗粒,再以CO为碳源,催化热解生长纳米炭纤维/纳米碳管。
2.
In order to in situ growing carbon nanofibers/carbon nanotubes on carbon fibers for further investigating the application of carbon nanofibers/carbon nanotubes in C/C composites,nano-nickel catalyst particles were coated on the carbon fibers' surfaces by KOH-impregnation-reduction method.
为了催化炭纤维原位生长纳米炭纤维/纳米碳管,研究纳米炭纤维/纳米碳管在炭/炭复合材料中的应用,采用KOH-浸渍-还原法在炭纤维上制备纳米催化剂颗粒。
3.
In order to grow carbon nanofibers/carbon nanotubes on carbon fibers,and further investigate their effect on the interface microstructure and thermal conductivity of C/C composites,nano Ni catalyst particles were coated on the surfaces of carbon fibers by impregnation-reduction method using Ni(NO3)2 as catalyst precursor,H2 as reduction gas and N2 as carrier gas.
为了在炭纤维表面原位生长纳米炭纤维/纳米碳管,研究它对炭/炭复合材料微观界面结构和导热性能的影响,以硝酸镍为催化剂前驱体,H2为还原气体,N2为载气,采用浸渍-还原技术在炭纤维表面制备纳米Ni催化剂颗粒。
3) carbon nanotube fibers
碳纳米管纤维
1.
The synthetic methods and products of carbon nanotubes and carbon nanotube fibers at home and abroad in recent years are summarized.
扼要介绍了碳纳米管、碳纳米管纤维的合成方法及近几年来国内外制备的各种碳纳米管产品。
4) carbon nanofibers
碳纳米纤维
1.
Field emission from individual vertically carbon nanofibers;
单根准直碳纳米纤维的场发射特性
2.
Synthesis of carbon nanotubes and carbon nanofibers onpulse plated Ni nanocrystalline substrate in ethanol flames;
脉冲电镀镍纳米晶基板上碳纳米管和碳纳米纤维的火焰法合成
3.
Study on sulfur tolerance of Pd-Pt catalyst supported on carbon nanofibers for hydrogenation of naphthalene to tetralin;
碳纳米纤维负载Pd-Pt催化剂的萘加氢抗硫性能
5) carbon nanofibers
纳米碳纤维
1.
Study on the Electrochemical Properties of Modified Electrodes Based on Carbon Nanofibers;
纳米碳纤维修饰电极的电化学行为研究
2.
Determination of cobalt and nickel by carbon nanofibers microcolumn preconcentration and inductively coupled plasma mass spectrometry
纳米碳纤维分离富集-电感耦合等离子体质谱法测定痕量钴和镍
3.
Under hydrothermal and ultrasonic conditions,concentrated acidification(vitriol / nitric acid)was applied to the surface treatment of carbon nanofibers,and the epoxy resin /carbon nanofibers composite materials was prepared.
采用浓酸(浓硫酸/浓硝酸)氧化法对纳米碳纤维进行表面处理,在水热和超声分散条件下,制备了纳米碳纤维/环氧树脂复合材料。
6) carbon nanofiber
纳米碳纤维
1.
Fabrication of carbon nanofiber based on polyacrylonitrile by electrospinning;
电纺法制备聚丙烯腈基纳米碳纤维
2.
Study on microwave attenuation performance of vapor-growth carbon nanofibers;
气相生长纳米碳纤维微波衰减性能研究
3.
Preparation of electroless Ni-Fe-Co-P alloy plating on carbon nanofibers;
纳米碳纤维化学镀镍-铁-钴-磷合金镀层
补充资料：纳米碳管
分子式：
CAS号：
性质：由碳原子有序排列卷曲而成的纳米尺寸、中空管状结构的准一维碳材料。由单个碳原子层卷曲而成的叫单壁纳米碳管；由多个碳原子层卷曲而成的叫多壁纳米碳管。纳米碳管的特殊结构和较大的长度直径比使其具有特殊性能。其质量是同体积钢的六分之一，强度约是钢的100倍，并具有很强的导热性和导电性、优良的场发射性能，根据其结构特性，可呈现金属性质或半导体性质。纳米碳管将广泛用于制造超微导线、开关以及纳米级电子线路。也可作为某些材料的添加剂，提高材料的某种特殊性能。
CAS号：
性质：由碳原子有序排列卷曲而成的纳米尺寸、中空管状结构的准一维碳材料。由单个碳原子层卷曲而成的叫单壁纳米碳管；由多个碳原子层卷曲而成的叫多壁纳米碳管。纳米碳管的特殊结构和较大的长度直径比使其具有特殊性能。其质量是同体积钢的六分之一，强度约是钢的100倍，并具有很强的导热性和导电性、优良的场发射性能，根据其结构特性，可呈现金属性质或半导体性质。纳米碳管将广泛用于制造超微导线、开关以及纳米级电子线路。也可作为某些材料的添加剂，提高材料的某种特殊性能。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条