1) Co3O4 nanoparticles
纳米Co3O4
1.
In this paper,Co3O4 nanoparticles were synthesized successfully by using low-cost,porous,reproducible bamboo charcoal as biologic template in conjunction with sol-gel method.
选用廉价、多孔、可再生的竹炭作为模板,结合溶胶-凝胶法成功地制备了纳米Co3O4。
2) Co3O4 nanoparticle
Co3O4纳米粉
1.
The precursor of Co3O4 nanoparticles is synthesized through solid state reaction at ambient temperature.
随温度的升高,前驱体分解过程分两步进行:首先前驱体脱水分解为CoC2O4,然后再分解为Co3O4纳米粉。
3) Co3O4 nano-particles
Co3O4纳米粒子
1.
The Co3O4 nano-particles were firstly pretreated by the silane coupling agent containing vinyl group(A-151) in order to introduce vinyl groups on their surfaces.
以含乙烯基的硅烷偶联剂(A-151)处理Co3O4纳米粒子,在Co3O4粒子表面引入乙烯基,然后以K2S2O8为引发剂,十二烷基苯磺酸钠(SDBS)为乳化剂,采用乳液聚合,在Co3O4粒子表面接枝甲基丙烯酸丁酯,研究了影响Co3O4纳米粒子表面接枝的有关因素,并优化工艺参数。
4) polystyrene/Co_3O_4() composite nanoparticles
聚苯乙烯/Co3O4复合纳米粒子
5) Co_3O_4
Co3O4
1.
A new method is used to prepare wellseparated and spherical tricobalt tetraoxide(Co_3O_4)nanosized particles.
采用一种新方法———接枝羧基淀粉(ISC)吸附金属离子前驱物(ISC Co)热解法, 制备了粒度分布均匀、分散性好的Co3O4 纳米颗粒。
2.
A series of Co_3O_4/Al_2O_3 catalysts were prepared via solid-state reaction and characterized by X-ray diffraction(XRD).
采用室温固相合成法制备了不同负载量的Co3O4/Al2O3系列催化剂,用X-射线衍射(XRD)技术对其物相结构进行了表征,并考察了负载量和焙烧温度对甲烷低温燃烧催化活性的影响。
3.
A precipitation method to prepare Co_3O_4 ultrafines was reported.
报道了一种液相控制沉淀与分解制备Co3O4超微粉的方法。
6) Co 3O 4
Co3O4
1.
Co 3O 4 nanorods have been synthesized at 160℃ for 10 h in the solution of oleic and n cetane by an emulsion solvothermal method using Co(NO 3) 2·6H 2O as starting materials.
以Co(NO3) 2 ·6H2 O为主要原料 ,H2 O2 为氧化剂 ,在油酸和正十二烷烃的混合溶液中 ,利用溶剂热技术于 160℃反应 10h ,成功地合成了Co3O4 纳米棒 。
2.
The negative electrode materials Co 3O 4 with constant particle size for lithium ion battery were prepared by mechanical milling of Co 3O 4.
采用机械球磨制备了一定粒度的锂离子电池负极材料Co3O4 。
补充资料:poly(bisphenol a-co-4-nitrophthalic anhy-dride-co
CAS:61128-46-9
分子式:(C31H20O8·C6H8N2)x
中文名称:5,5'-[(1-甲基亚乙基)双(4,1-亚苯氧基)]双-1,3-异苯并呋喃二酮与1,3-亚苯二胺的聚合物
英文名称:1,3-Isobenzofurandione, 5,5'-[(1-methylethylidene)bis(4,1-phenyleneoxy)]bis-, polymer with 1,3-benzenediamine
3-isobenzofurandione, 5,5'-[(1-methylethylidene)bis(4,1-phenyleneoxy)]bis- polymer with 1,3-benzenediamine
poly(bisphenol a-co-4-nitrophthalic anhy-dride-co
1,3-Isobenzofurandione,5,5'-[(1-methylethylidene)bis(4,1-phenyleneoxy)]bis-,polymer with 1,3-benzenediamine
分子式:(C31H20O8·C6H8N2)x
中文名称:5,5'-[(1-甲基亚乙基)双(4,1-亚苯氧基)]双-1,3-异苯并呋喃二酮与1,3-亚苯二胺的聚合物
英文名称:1,3-Isobenzofurandione, 5,5'-[(1-methylethylidene)bis(4,1-phenyleneoxy)]bis-, polymer with 1,3-benzenediamine
3-isobenzofurandione, 5,5'-[(1-methylethylidene)bis(4,1-phenyleneoxy)]bis- polymer with 1,3-benzenediamine
poly(bisphenol a-co-4-nitrophthalic anhy-dride-co
1,3-Isobenzofurandione,5,5'-[(1-methylethylidene)bis(4,1-phenyleneoxy)]bis-,polymer with 1,3-benzenediamine
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条