1) road filled-sand and clay wrapping
包边填砂路堤
1.
In this paper,for two foundation treatments,CFG pile reinforcement and plastics drainage plate preloading,synergism dynamic response feature and deformation rule of road filled-sand and clay wrapping including reinforcing foundation under earthquake vibratory load are calculated and analyzed with FEM method.
包边填砂路堤是采用一种砂或砂石料填筑,用粘性土包边封顶的路堤结构形式,在地震荷载下,填砂料与包边粘性土各自的动力特性,以及它们之间相互作用所表现出的动力响应直接影响到路面结构及其路堤变形。
2) sand-filled subgrade
填砂路堤
1.
Analysis on construction technology control of sand-filled subgrade
浅析填砂路堤施工工艺控制
3) wrapping embankment
包边路堤
1.
The wrapping method for middle expansive soil embankment has been demonstratedi,n which the slope stability,strength and deformation of subgrade,and damp preservation action of lime stabilized wrapping soil for middle expansive soil wrapping embankment have been analyzed.
对中膨胀土路堤包边方案进行深入论证,对中膨胀土包边路堤边坡稳定性、路基强度与变形及石灰包边层的保湿作用进行分析。
4) high slope rock-fill embankment
高边坡填石路堤
1.
The determination of stability safety factor of high slope rock-fill embankment using Bishop method;
毕肖普法确定高边坡填石路堤稳定安全系数
5) embankment filling
路堤填筑
1.
High-speed railway embankment filling technology and quality control experiment research
高速铁路路堤填筑工艺及质量控制试验研究
2.
An analytical model for soil arching within piled embankments is developed,which can consider the coupled effect of the embankment filling and soil consolidation.
土拱效应分析是桩承式路堤设计时需要解决的首要问题,在总结分析已有现场测试资料及研究成果的基础上,建立能考虑路堤填筑过程与地基土固结相耦合的土拱效应计算模型。
6) rock-fill embankment
填石路堤
1.
Construction technology and quality control method of rock-fill embankment;
浅谈填石路堤施工工艺和质量控制方法
2.
Non-linear constitutive model for rock-fill embankment;
填石路堤中的非线性本构模型
3.
From the aspect of rock-fill embankment s engineering properties on construction,detection and large particle size fillers,review and conclude the domestic and foreign rock-fill embankment construction technology,and view the development trend of rock-fill embankment construction technology.
填石路堤是我国山区高等级公路修筑常见的一种路堤型式。
补充资料：硬边力车胎包贴法成型机
分子式：
CAS号：
性质：将胶帘布、钢丝圈等部件采用包贴法制成硬边力车胎外胎胎坯的机械。主要由机箱、主动鼓、被动鼓、下压辊和旁压辊等组成。成型时将两根钢丝圈套在主动鼓与被动鼓的鼓面沟槽中，再使被动鼓沿导轨移动，把钢丝圈张紧，然后启动主动鼓钢丝圈与被动鼓一起运转，同时将胶帘布顺着钢丝圈的运转方向添入，围贴一周，并把外伸的帘布进行反包和压贴。
CAS号：
性质：将胶帘布、钢丝圈等部件采用包贴法制成硬边力车胎外胎胎坯的机械。主要由机箱、主动鼓、被动鼓、下压辊和旁压辊等组成。成型时将两根钢丝圈套在主动鼓与被动鼓的鼓面沟槽中，再使被动鼓沿导轨移动，把钢丝圈张紧，然后启动主动鼓钢丝圈与被动鼓一起运转，同时将胶帘布顺着钢丝圈的运转方向添入，围贴一周，并把外伸的帘布进行反包和压贴。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条