1) fault development model
断裂发育模式
2) boundary fault developing patterns
边界断裂发育方式
3) fracture model
断裂模式
1.
Using crack deflection parameter,the fracture models were discussed.
采用X射线衍射技术就粘结剂种类和氮化硅的加入对材料析晶性能的影响进行了分析,采用扫描电镜对不同浸渗次数复合材料的截面和断口形貌进行了观察,并采用裂纹偏转因子对复合材料断裂模式进行了分析。
2.
The influence of hollow micro-sphere content on the tensile properties and impact properties of composites were studied, and the fracture model of composites was observed by SEM.
选用微米级空心微珠和纳米SiO2作为填料,制备环氧树脂(EP)/纳米SiO2/空心微珠复合材料,研究空心微珠用量对复合材料的拉伸性能和冲击性能的影响,采用扫描电镜(SEM)研究复合材料的断裂模式,初步讨论了复合材料的隔热性能。
3.
The fracture models of two kinds of JB-9014,pressed from coarse and fine powders respectively,were analyzed at various temperatures and under the EDS and SEM.
对粗细两种颗粒成型的JB-9014在不同温度和单轴加载下的断裂模式进行了分析。
4) fracture mode
断裂模式
1.
The fracture mode influences the tensile strength,and deposition can improve.
抗拉强度受断口断裂模式的影响,断裂模式随温度的升高由钨颗粒解理型断裂逐渐向钨颗粒与粘结相脱开型断裂转变;三元系合金析出物使钨合金W-W界面、W-M界面得以改善,是抗拉强度出现平台的原因。
2.
The dynamic tensile properties of tungsten fibers(80%,volume fraction) reinforced Zr based amorphous alloy matrix composite was investigated by means of the Split Hopkinson Pressure Bar(SHPB),and Scanning Election Microscope(SEM) was used to evaluate the fracture mode of the composite under dynamic tension.
采用霍普金森杆拉伸技术研究了W丝体积分数为80%的W丝/Zr基非晶合金复合材料的动态拉伸性能,通过扫描电镜研究了该复合材料动态拉伸断裂模式。
3.
The effect of dynamic shear and tensile strength of tungsten heavy alloys on the fracture mode of fragmentation under explosive loading was investigated.
研究钨合金动态抗拉和抗剪强度对爆炸加载下破片宏观断裂模式的影响。
5) fault-developed belt
断裂发育带
补充资料：油气田开发方式(见油气田生产方式)
油气田开发方式(见油气田生产方式)
development pattern of oil and gas field:see recovery pattern of oil and gas field
a垃d gas月e卫d) 、‘。尸卫Jlent见油气田小冰、*pa士teroof ojl
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条