1) resisting-earthquake performance
防震性能
1.
Based on spot investigation,this paper deals with the resisting-earthquake performance of masonry-concrete building and comprehensive analysis of fortification level,arrangement of building,construction measure and construction quality etc.
12"汶川大地震造成大量房屋损毁,本文通过对汶川县城实地调研,对灾区的砖混结构房屋进行防震性能研究,从设防水平、抗震布置、构造措施、施工质量等方面综合分析,为今后抗震设计、施工提供参考依据。
2) antiknock quality
防震特性
3) thermal shock resistance
热震性能
1.
The thermal shock resistance was evaluated.
为了研究纳米热障涂层的热震性能,采用等离子喷涂工艺制备了纳米Y2O3-ZrO2(YSZ)热障涂层,并测试了涂层的热震性能。
2.
In order to study the thermal shock resistance and thermal shock failure mechanism of Al_2O_3-TiO_2/NiCoCrAlY coatings,the samples were heated to 400℃ and hold a certain time then cooled to room temperature by quenching.
在 ZL104铝合金基体上喷涂了 Al_2O_3-TiO_2/NiCoCrAlY 系梯度涂层和 Al_2O_3-TiO_2非梯度涂层,对这两种试样进行了室温400℃冷热循环试验,以研究涂层的抗热震性能和热震失效机制。
3.
The microhardness, bonding strength and thermal shock resistance were tested.
运用扫描电镜对涂层显微结构进行观察和分析,同时测试了涂层的显微硬度、结合强度和热震性能。
4) thermal shock failure
热震性能
1.
The results show that the coatings containing TiB2/Al2O3 and Cr3C2 exhibit favorable porosity, adherence, wear resistance and good resistance to thermal shock failure, in general, superior to those of Al2O3/ TiO.
涂层常规性能测试结果表明:含TiB2/Al2O3和Cr3C2 的涂层的孔隙率较低、结合强度高、具有优良的耐磨性及抗热震性能。
5) Seismic performance
抗震性能
1.
Study on the seismic performance of RC column confined by prestrssed steel plate hoops;
设置外包预应力钢板箍RC短柱抗震性能研究
2.
Experimental study on seismic performance of RC shear wall joint with bi-directional single row of steel bars;
双向单排配筋剪力墙节点抗震性能试验研究
3.
Analysis on seismic performance of SRC-RC transfer column and the anchoring length of shape steel;
SRC-RC转换柱抗震性能及型钢最小延伸长度分析
6) thermal shock properties
热震性能
1.
The microstructure,microhardness and thermal shock properties of plasma sprayed coatings NiCr/Cr3C2,NiCrCoAlY are researched in this paper.
研究分析了等离子喷涂NiCrC/r3C2、NiCrCoAlY涂层的微观组织结构,并对2种涂层进行了显微硬度及抗热震性能实验。
2.
And then the microhardness and thermal shock properties of the coatings were measured.
通过等离子喷涂方法在穿孔顶头尾部材料42CrMo钢表面分别制备NiCr-Cr3C2涂层和Al2O3(13%TiO2)涂层,运用OM,XRD,SEM等分析测试手段对涂层的组织、形貌和物相成分进行表征,并对两种涂层进行了显微硬度及抗热震性能实验。
补充资料：防震
分子式：
分子量：
CAS号：
性质：防止仪表和设备等的震动。内部的震动表现为被测介质的脉动，会使仪表的弹性元件易于损坏，并影响测量的精确性，外部的震动是由于固体的输送和粉碎、气体的压缩和传送、动力机械的运动等所造成。防震方法有：（1）增设缓冲器或节流器；（2）用橡皮垫吸收震动；（3）用弹簧做的减震器等。
分子量：
CAS号：
性质：防止仪表和设备等的震动。内部的震动表现为被测介质的脉动，会使仪表的弹性元件易于损坏，并影响测量的精确性，外部的震动是由于固体的输送和粉碎、气体的压缩和传送、动力机械的运动等所造成。防震方法有：（1）增设缓冲器或节流器；（2）用橡皮垫吸收震动；（3）用弹簧做的减震器等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条