1) Corten-B weathering steel
Corten-B耐候钢
1.
Three kinds of Corten-B weathering steels of different grain size with the same chemical composition were prepared by different rolling and heat treat process.
采用相同轧制工艺及不同热处理方法制备了化学成分相同而晶粒尺寸不同的3种Corten-B耐候钢试样。
2) weathering steel
耐候钢
1.
Continuous cooling transformation curve of a weathering steel;
新型耐候钢连续冷却转变曲线的测定
2.
Control for Concasting Bloom Quality of High Strength Weathering Steel YQ450NQR1;
高强耐候钢YQ450NQR1连铸大方坯质量的控制
3) weathering steels
耐候钢
1.
Corrosion resistance of steel structure & application of weathering steels in building projects;
钢结构防腐及耐候钢在建筑工程中的应用
2.
The rust layer of carbon steels and weathering steels generated by wet and dry periodic immersion test was analyzed by X-ray diffraction(XRD) and Raman microscopy.
通过对Q235碳钢和09CuPCrNi耐候钢的周期浸润加速腐蚀实验所得到的锈层结构的XRD和拉曼光谱分析表明:γ-Fe2O3、γ-FeOOH和α-FeOOH是构成锈层的主要腐蚀产物。
3.
The ICPAES method was applied to measure the contents ofCr,Cu,Mn,Sb,Si,V,P and Ti in two kinds of weathering steels of Corten-B and Sten3.
本文分别用化学法和电感耦合等离子体发射光谱法(ICP- AES)测定了Corten-B和Sten3两种耐候钢中Cr、Cu、Mn、Sb、Si、V、P、Ti等8种微量元素的含量,并与传统的化学法进行了对比。
4) Cu-P-RE weathering steel
CuPRE耐候钢
5) Weather Resistant Steel
耐候钢
1.
Tests showned that the wire/flux developed for SAW is suitable for welding of high weather resistant steel and high strength steel by periodic soakage corrosion test and mechanics properties test on deposited metal.
通过焊接熔敷金属的周期浸润腐蚀和力学性能等试验 ,表明研制的埋弧焊焊丝 /焊剂适用于高耐候结构钢及高强度焊接结构耐候钢。
2.
The weather resistance and corrosion process of 09CuPTiRE and Q235 steels as well as Anshan and Japanese weather resistant steels were investigated through immersion wet dry test.
通过浸渍干湿循环加速腐蚀试验 ,采用失重法测量年蚀率 ,SEM观察腐蚀产物的表面形貌和断面形貌 ,XRD测定腐蚀产物的物相组成 ,电化学阻抗谱仪测定锈层的交流阻抗谱 ,研究了0 9CuPTiRE耐候钢与Q2 3 5、鞍钢耐候钢和日本耐候钢三种参比钢的耐候性能及腐蚀过程 。
3.
On the basis of the test data,it is put forward that the periodical immersed corrosion test is applicable to the rapid evaluation on weather resistant steel.
评述了耐候钢的大气曝晒和室内加速腐蚀试验的特点及现状 ,根据试验数据 ,提出了周期浸润腐蚀试验适用于耐候钢的快速评价。
6) CuPCrNiMoNb weathering steel
09CuPCrNiMoNb耐候钢
补充资料：[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式：C16H16ClN3O3S
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条