1) CCD monitoring technique
CCD监测技术
1.
Spallation behaviors of thermally grown oxide ceramic films for PM2000 Fe-Cr-Al alloy under compressive stresses were studied by surface impression method and CCD monitoring technique.
采用表面压痕技术和CCD监测技术研究了PM2000Fe-Cr-Al高温合金热生长氧化物陶瓷薄膜在压应力作用下的脱落行为。
2) CCD measuring technology
CCD测量技术
3) CCD optoelectricity measuring technology
CCD光电测控技术
1.
The advanced CCD optoelectricity measuring technology was adopted to sample the data of principle curves, and the real north of surveyed point was calculated with the least square method.
根据陀螺理论的基本规律及陀螺运动特性 ,建立陀螺元件的力学模型进行定量结果的分析 ,得出高速旋转的陀螺转子在地球自转角速度影响下的运动规律 ;通过先进的 CCD光电测控技术对其进行采样和数学计算 ,从而得出被测点子午线的真北方向 ,实现系统的定向过程 ;通过经纬仪实施对导弹的瞄准 ,确定待发射导弹的坐标方位角 ,使定向和瞄准一体化 ,为新一代采取机动发射的武器系统提供一种新颖的陀螺经纬仪结构方案。
4) Monitoring technique
监测技术
1.
Development of Environmental Monitoring Instruments and Monitoring Technique;
环境监测仪器与监测技术的发展概况
2.
Application of turbine-generator air gap monitoring technique;
水轮发电机空气间隙监测技术的应用
3.
Based on the principles of the interwells trace monitoring technique,this paper studies the reservoir description for high permeability channels in the reservoir of high water- cut oilfields,and applies the technique for enhancing the secondly recovery and thirdly recovery.
运用"井间示踪剂监测技术"的基本原理,开展了井间示踪剂监测技术在改善高含水油田二次及三次采油等方面的研究与应用。
5) monitoring technology
监测技术
1.
Current status and progress on red tide monitoring technology;
赤潮监测技术的现状与发展
2.
The corrosion monitoring technology applied in industrial circulating water;
腐蚀监测技术在工业循环水中的应用
3.
Monitoring Technology in Mechanical Deformation of Exterior-protected Constructions in Deep Foundation Ditch;
深基坑围护结构力学变形监测技术
6) technology monitoring
技术监测
1.
The application of technology monitoring in nanotechnology;
技术监测方法在纳米技术领域的应用研究
2.
Facilitating the application of technology monitoring for S&T management——application and research for technology monitoring in nanotechnology;
促进技术监测在政府科研管理中的应用——纳米技术监测应用研究
3.
The application of technology monitoring in science and research management ——nanotechnology monitoring;
技术监测在科研管理中的应用—纳米技术监测
补充资料:CC
分子式:C9H11N3O4·HCl
分子量:261.66
CAS号:10212-25-6
性质:白色针状晶体或结晶性粉末。熔点248-250℃(分解)。易溶于水,微溶于醇,几乎不微于乙醚、氯仿和苯。
制备方法:D-阿拉伯糖与氰氨、甲醇、氨水在40-45℃反应4小时,生成2-氨基-β-D-阿拉伯糖噁唑啉,将其与盐酸制成盐酸盐,与丙炔腈在60℃反应1小时,即生成环胞苷盐酸盐,总收率68%。
用途:抗肿瘤药。
分子量:261.66
CAS号:10212-25-6
性质:白色针状晶体或结晶性粉末。熔点248-250℃(分解)。易溶于水,微溶于醇,几乎不微于乙醚、氯仿和苯。
制备方法:D-阿拉伯糖与氰氨、甲醇、氨水在40-45℃反应4小时,生成2-氨基-β-D-阿拉伯糖噁唑啉,将其与盐酸制成盐酸盐,与丙炔腈在60℃反应1小时,即生成环胞苷盐酸盐,总收率68%。
用途:抗肿瘤药。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条