1) insulating castable
保温浇注料
1.
After the optimization of experiment,the golf-shaped bubble bauxite insulating castables with high performance were prepared.
优化实验后,制备出系列高性能高尔夫球型高铝空心球保温浇注料。
2) room temperature cured cast materials
室温固化浇注料
3) pouring temperature
浇注温度
1.
Effect of pouring temperatures on the microstructure of the semi-solid AlSi_9Mg alloy;
浇注温度对AlSi_9Mg半固态组织的影响
2.
Computer Aided Prediction of Effects of Pouring Temperatureon on the Solidification Structure for Twin-roll Thin Strip;
浇注温度对双辊薄带凝固组织影响的模拟预测
3.
Select the Proper Pouring Temperature of Castings Depending on Mold Filling Simulation;
依据充型模拟确定铸件浇注温度
4) low temperature pouring
低温浇注
1.
In addition, the low temperature pouring under near liquidus can also refine the grain-size.
另外发现在近液相线温度下进行低温浇注也可以起到细化晶粒的作用,且在630℃下对熔体进行电脉冲处理后浇注得到的凝固态组织最好。
2.
The semi-solid slurry of ZL101 Al alloy,which was grain-refined by RE master alloy,was prepared by low temperature pouring.
利用稀土中间合金对液态ZL101铝合金进行了细化处理,并用低温浇注技术制备了ZL101铝合金半固态浆料,研究了细化处理对所制备ZL101铝合金的半固态初生α相形貌和尺寸的影响。
5) casting temperature
浇注温度
1.
Effects of Casting Temperature on Al-5Cu Alloy in Indirect Squeezing Casting;
浇注温度对间接挤压铸造Al-5Cu合金的影响
2.
This paper researches the influence of modification process parameters(such as modification agent content, modification temperature, modification time and casting temperature etc.
研究了工业生产Sr变质亚共晶Al-7%Si合金时,变质剂含量、变质温度、变质时间、浇注温度等工艺参数对合金共晶硅细化及其性能的影响。
3.
The SiC foam/SiC_p/Al composites were fabricated by squeeze casting at different casting temperatures and the effect of casting temperature on mechanical properties of composites were investigated.
采用挤压铸造法制备出 SiC 泡沫/SiC_p 混合增强铝基复合材料,研究了不同浇注温度对复合材料力学性能的影响及影响机制。
6) high temperature pouring
高温浇注
1.
Based on the analysis of characteristics of heavy iron castings,it\'s considered that their casting method design principle should be as:bottom gating with dispersed ingates,fast and high temperature pouring.
通过分析大型铸铁件的特点,认为其浇注工艺设计的主要原则应当是:分散底注、快速浇注和高温浇注;并对各种浇注工艺的优缺点进行了详细分析。
补充资料：保温
分子式：
CAS号：
性质：又称保温。是用来提高热设备和低温设备的热经济性，节约能源，尽量避免热量的散失或吸入，减少传热量所采用的一种手段。
CAS号：
性质：又称保温。是用来提高热设备和低温设备的热经济性，节约能源，尽量避免热量的散失或吸入，减少传热量所采用的一种手段。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条