1) oil-extraction workers
采油工人
1.
This study takes oil-extraction workers in two branches of Shengli Oilfield,Gudong Oil-extraction Factory and Zhuangxi Oil-extraction Factory as target by methods of literature,questionnaires,interviews,logic analysis and data statistics.
以胜利油田桩西采油厂和孤东采油厂第一线的采油工人为研究对象,使用文献资料法、访谈法、问卷调查法、逻辑分析法和数理统计法等5种方法,同时本研究以转换理论模型为指导,探讨采油工人从"静止"到"活动"再到保持体育锻炼的动态变化过程。
2) artificial buffeting exploring
人工振动采油
1.
The mechanisms of artificial buffeting exploring are studied by elasticity wave theory in the article.
作者在文中利用粘弹性波动理论来定量研究了人工振动采油的机理 ,首次推导出弹性波引起流体和固体振动强弱之比与储层属性的关系。
3) production engineering
采油工程
1.
Study on production engineering measure planning;
采油工程措施规划方法研究
2.
Status quo and future development of production engineering at high water cut stage in Daqing oilfield;
大庆油田特高含水期采油工程研究现状及发展方向
3.
During the "10th 5-Year-Project",the innovation about production engineering techniques emerged continuously in Daqing Oil Field.
“十五”期间,大庆油田采油工程技术不断创新,在分层注入、增产改造、举升工艺、油水井大修、采气工艺等方面取得多项成果,攻关配套了海拉尔复杂岩性储层增产增注技术,创新研究了深部火山岩储气层压裂改造技术,研究完善了水驱及三次采油注采工艺技术,发展提高了低渗透油田改造工艺技术,成熟配套螺杆泵举升工艺技术,为油田的勘探开发提供了有力的技术支撑。
4) Oil Production Technology
采油工艺
1.
Current Situations and Development Trends of Oil Production Technology in Ansai Oilfield;
长庆安塞油田采油工艺现状与发展趋势
2.
Because of the effect of offshore sand control equipment and the limit of oil production technology, the screen and circulation pack sand control technology, ESPCP.
由于受当时海上防砂工艺装备的影响和采油工艺技术的限制,CB243区块在投产初期采用挂滤砂管、循环充填防砂工艺以及潜油螺杆泵、电泵带电加热机械采油方式生产,投产后出现油井产能低、不能连续稳定生产、检泵周期短等问题。
5) Oil recovery engineering
采油工程
1.
Development and application of oil recovery engineering software component;
采油工程构件库的开发与应用
2.
Oil Recovery Engineering Management Information System Based on Internet/Intranet;
基于Internet/Intranet的采油工程管理信息系统
6) production technology
采油工艺
1.
To enhance production technology level of screw pump,the basis law of production parameters, such as working fluid level,rotate speed,water cut,pump type, degree of tightness of stuffing box,were tested,analysed and sumed up, forming a complete set of the technology,which can direct field management.
为提高螺杆泵采油工艺水平,结合二连油田实际情况,通过逐步完善优化设计技术、测试诊断技术及相关配套工艺,进一步提高了螺杆泵采油工艺的适应性;并通过测试分析,总结出扭矩与动液面、转速、含水、泵型、盘根盒松紧程度等生产参数的基本规律,以指导现场管理。
2.
A new kind of oil production technology using sucker rod pump with a hydraulic feedback type unit at the bottom of the hollow sucker rod string is introduced.
介绍了一种新型空心杆采油工艺技术 ,这种技术采用了具有液力反馈原理的空心杆抽油泵 ,该泵的特点是能有效地减小空心杆的下行阻力 ,并能增加抽油杆的下行动力。
补充资料：采油
开采地下油层中油的工艺方法。油举升到地面需靠油藏本身的能量或人工补充的能量，前者是有限的，后者是多样的，故使采油方法多样化。可分为自喷法和人工举升法(常用泵抽法)两大类。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条