1) ANSYS-ADAMS simulation
ANSYS-ADAMS仿真
2) ADAMS simulation
ADAMS仿真
1.
This theory,which is validated by ADAMS simulation,provides a theoretical base for further research of the rhombus concept car.
这一理论已经得到ADAMS仿真的验证,并为类菱形车的进一步研究提供了理论基础。
2.
Then comparing with the analysis result of theory and ADAMS simulation by an example,and the final result is obtained.
最后,通过算例比较了理论分析与ADAMS仿真计算结果,得到了理论分析与仿真计算结果吻合度较好的结论。
3.
In this paper, ADAMS simulation is applied to the separating motion of the several-satellite system in the background of Galileo satellite launched by Long March launch vehicle, in which, the detailed separating model of both satellites and launch vehicle and the procedure control of simulation are described, and the method of affect analysis about all kinds of elements is introduced.
同时 ,运用ADAMS仿真可以方便地对多星分离的故障模式进行分析 ,对数值仿真难以实现的碰撞问题进行直观的检
3) ADAMS/Rail Simulation
ADAMS/Rail仿真
4) ANSYS simulation
ANSYS仿真
1.
In the ANSYS simulation of surface cracks in cylinder based on ACFM,the isotropic aluminium cylinder is adopted,and also is the pole coordinate system.
采用交变磁场测量的圆柱体表面缺陷的ANSYS仿真,以各向同性铝圆柱体为试件,采用柱坐标系及矩形激励线圈,电流流向为圆柱体轴向。
2.
According to the characters of mortice and tenon joints, it uses computer techniques such as ANSYS simulation to study difference of the mechanics and deflection performance between add- ons support and without support of the beam.
主要对故宫太和殿山面扶柁木结构现状进行了静力分析,根据扶柁木卯榫节点连接特点,采用 ANSYS仿真技术,研究了支顶前后的扶柁木结构力学和变形,详细分析了各项相关参数,得出了有效结论。
3.
Firstly elaborated the integration structural design correlation theories, through the theoretical analysis and the ANSYS simulation, has analyzed the integration design method validity and the sophisti
首先论述了一体化结构设计的相关理论,通过理论分析与ANSYS仿真,分析了一体化设计方法的有效性和先进性;然后设计并研究了电阻应变式传感器和一体化电子测压器,分别介绍了电阻应变式传感器的原理及整体电路设计和一体化电子测压器的校准原理,详细介绍了整个校准试验过程;最后介绍了试验数据的处理方法和试验结果。
5) ADAMS simulation software
ADAMS仿真软件
1.
Methods Using ADAMS simulation software, the upper arm and the forearm were simplified as two rigid-bodies, the conjunction between the upper arm and the trunk as a spherical joint, the conjunction between the upper arm and the forearm as a revolute .
方法 运用ADAMS仿真软件 ,将上臂和前臂的骨骼简化为两刚体 ,上臂和躯干间的连结简化为球铰 ,上臂和前臂间的连结简化为合页铰 ,肌肉的作用简化为作用于其质心处的力 ,建立上肢的运动模型 ,并对旋内外、展收和屈伸三种简单运动进行仿真模拟。
6) ADAMS simulation calculating
ADAMS仿真计算
补充资料：[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式：C16H16ClN3O3S
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条