1) oil and rust removing
除油除锈
1.
In the paper,the optimum formula combining oil and rust removing into one for steel A3 was obtained by orthogonal experiments.
文章通过正交实验考察和筛选得到了一种将A3钢除油除锈合二为一的较为理想的配方,该配方由无机酸、有机酸、络合剂、缓蚀剂、表面活性剂等物质组成,工艺具有常温、快速、高效、环保等特点。
2.
The optimum formula combining oil and rust removing into one for chemical polish was obtained by experimental investigation.
介绍了一种在A3钢上直接化学镀铜的预处理工艺,并通过实验考察和筛选得到了将除油除锈合二为一和化学抛光的较为理想的配方。
2) Derust
除锈
1.
The preparation of solution for derustiny, degreasing and phosphorizing steel;
钢铁除锈除油磷化液的研制
2.
ln this paper, the basic principle of automatic computer recognition of derusting grade of steel plate is proposed and studied, First, image information of derusted steel plate is taken by CCD picture pick -up device, then, shade of grey and oolor are digitized, images are carved up and contrasted, and the texture and structure are analysed.
提出并研究了实现钢板除锈等级计算机自动判别的基本原理。
3) rust removal
除锈
1.
The key problems for the application of high pressure water jet in rust removal and cutting are the easy adjustment and control of high pressure water, the design of the executive mechanism and safe and reliable operation of the equipment.
高压水射流除锈与切割应用关键要解决灵敏调控、执行机构设计、安全、运行可靠等问题,实现商品化。
2.
Described are the selection of the ball blasting rust removal method for couplers and components as well as the design and application of the ball blasting rust removal equipment for couplers and components.
介绍了车钩及配件抛丸除锈方法的选择和车钩及配件抛丸除锈设备的设计、应
3.
During extending the air-cooling assembly unit of 2×200 MW in Taiyuan Sec-ond Electric Power Plant, a good result was acquired in applying the new type of HP-2A rust-removal agent to rust removal and anticorrosion of the inwall in the large-size piping with air-cooling circulation water.
太原第二热电厂扩建2×200MW空冷供热机组基建施工期间,使用HP-2A新型除锈剂,在电厂空冷循环水大型管内壁除锈、防腐,得到良好效果。
4) derusting
[di:'rʌstiŋ]
除锈
1.
Experimental study of abrasive jet by collima- ting tube used in tubing derusting;
准直管磨料射流用于油管除锈的实验研究
2.
Application of Chemic Cleansers in Derusting and Degreasing in Oxygen Pipe;
采用化学清洗剂对氧气管道除锈、脱脂
3.
Surface cleaning is critically important for pipe coating, and shot (impeller) blasting is the most suitable derusting method for most kinds of coating materials.
钢管的表面处理是决定覆盖层质量的关键因素,对大多数覆盖层而言,喷(抛)丸除锈法是最理想的除锈方式。
5) Rust removing
除锈
1.
In this paper, a kind of rapid rust removing and rust preventing liquid is developed, which can be used at normal temperature.
针对工序间钢铁件易锈蚀的问题 ,研制出了一种常温快速除锈防锈液 ,该除锈防锈液具有除锈、防锈、钝化功
2.
The rust removing result of NH 4HF 2 solution to fabrics is superior to the common rust remover oxialic acid or sodium fluoride solution.
该溶液对织物有明显的除锈退色作用，性能优于普通除锈剂草酸或氟化钠溶液。
6) Removing rust
除锈
1.
The ways of new type of coating has been developed with double functions of removing rust and antirust.
研究一种以水为溶剂具有除锈防锈双重功能的底面合一涂料的制备方法。
2.
The result showed that the method had excellent effect of removing rust and passivation.
介绍了空压氮压装置的碳钢管道化学浸洗的方法以缓蚀性能、渗透性能较好的清洗剂———甘奈，达到了清洗除锈钝化的目的，取得了较好的效果
补充资料：除油
分子式：
CAS号：
性质：又称除油。指从废水、污泥或固体废物中去除油脂的方法。从废水中分离油脂的设备有隔油池和除油池。另外，它也指从机器部件或铁制产品表面上除掉油脂的过程。油脂主要来自机加工时沾上的润滑油、防锈油，贮存期间的油封，模制时的脱膜剂以及磨抛光时沾上的抛光膏等。脱脂的方法有：有机溶剂脱脂、化学脱脂、电化学脱脂等。有时需要几种方法同时使用。
CAS号：
性质：又称除油。指从废水、污泥或固体废物中去除油脂的方法。从废水中分离油脂的设备有隔油池和除油池。另外，它也指从机器部件或铁制产品表面上除掉油脂的过程。油脂主要来自机加工时沾上的润滑油、防锈油，贮存期间的油封，模制时的脱膜剂以及磨抛光时沾上的抛光膏等。脱脂的方法有：有机溶剂脱脂、化学脱脂、电化学脱脂等。有时需要几种方法同时使用。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条