1) Tigers mouth position
虎口位置
2) gate location
浇口位置
1.
Experiential Scouting Method:New Method of Optimization of Gate Location of Mold Design;
注塑模浇口位置优化新方法——经验搜索法
2.
Design Optimization of Plastics Injection Mold Gate Location Based on MoldFlow;
基于MoldFlow软件优化设计注塑制件的浇口位置
3.
Taking into account the great influences of gate location on part warpage,the computer aided engineering for injection molding was combined with optimization technology to find the optimal gate location with minimized feature warpage.
通过优化特征翘曲度,将数值模拟和优化技术相结合,提出一种注塑模具浇口位置设计方法。
3) gate position
浇口位置
1.
In view of the importance of gate position and quantity in the design of injection plastic molding,Moldflow,special software for analyzing the plastic flow in mold,was applied to the optimization design of gate in injection mold.
针对选择合理的浇口位置及数量在塑料模具设计中的重要性,在注塑模具设计中利用专业模流分析软件MoldFlow对模具浇口进行了优化设计。
2.
The relations of gate position to product shrinkage,gate dimension to facticity data of tensile strength and toughness of injection materials to mould cavity and ejector mechanism were stated.
简述了塑料测试试样浇口位置与制品收缩的关系,阐述了浇口尺寸与拉伸强度数据真实性的关系,以及注塑材料的韧性程度与型腔设计及顶出机构等关系,提出了解决问题的措施;还提出了从根本上解决厚制品收缩的方法——盆地修模法。
3.
The relations between gate position and injection pressure, weldline as well as part thickness in valve-typed controlled filling process are analyzed.
介绍阀式浇注控制的原理和特点,通过对浇注系统的控制充填模式研究,以注塑流动分析为理论基础,依靠CAE技术对浇注充填过程进行流动模拟,分析阀式控制的充填过程中浇口位置与注塑压力、熔接痕、制件壁厚之间的相互关系,为改善注塑工艺条件和提高注塑产品质量提供理论依据。
4) Cloth Fell-position
织口-位置
5) incision
[英][ɪn'sɪʒn] [美][ɪn'sɪʒən]
切口位置
1.
The effect of incision position in phacoemulsification on postoperative astigmatism;
切口位置对晶状体超声乳化术后散光的影响
6) openings position
洞口位置
1.
frame connected with openings at different positions are analyzed by using finited element method,influence of openings positions on stress distribution and the way of transferring stress for transfer beam supported on R.
利用有限元法对竖向荷载作用下上部墙体不同洞口位置(不开洞,开中洞,开边洞)的框支转换梁进行了受力分析,探讨了洞口位置对框支转换梁的应力分布和传力途径的影响。
补充资料：虎口
虎口
〗第1指蹼的别名。位于拇指与示指之间。为适应拇指外展、对掌的需要，虎口是手部指蹼最宽的一个。伸张与松弛的宽度比较大。正常情况下，拇指充分外展时，虎口最大，拇指尺侧缘与示指桡侧缘间的角度可大于90°。〖DK
第1指蹼的别名。位于拇指与示指之间。为适应拇指外展、对掌的需要，虎口是手部指蹼最宽的一个。伸张与松弛的宽度比较大。正常情况下，拇指充分外展时，虎口最大，拇指尺侧缘与示指桡侧缘间的角度可大于90°。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条