1) PbS-ZnS-H_2O system
PbS-ZnS-H_2O系
1.
Combination with the process of lead zinc sulfide minerals\' rich-oxygen leaching,the values of G~0 and the reactions\'ψ-pH formulas of PbS-H_2O system and ZnS-H_2O system were obtained based on thermodynamic calculation respectively,and theψ-pH figures of PbS-H_2O system,ZnS-H_2O system,and PbS-ZnS-H_2O system were drawn when temperature was 160℃,oxygen partial pressure was 1.
0时,PbS-H_2O系、ZnS-H_2O系、PbS-ZnS-H_2O系的电位-pH图,为铅锌硫化矿的高温富氧浸出过程提供了一定的热力学数据。
2) PbS-H_2O system
PbS-H_2O系
1.
Combination with the process of lead zinc sulfide minerals\' rich-oxygen leaching,the values of G~0 and the reactions\'ψ-pH formulas of PbS-H_2O system and ZnS-H_2O system were obtained based on thermodynamic calculation respectively,and theψ-pH figures of PbS-H_2O system,ZnS-H_2O system,and PbS-ZnS-H_2O system were drawn when temperature was 160℃,oxygen partial pressure was 1.
结合铅锌硫化矿富氧浸出过程,进行热力学计算,分别得到了PbS-H_2O系、ZnS-H_2O系各物质的G~0值以及该体系下各反应对应的电位-pH表达式,并绘制出温度为160℃、氧分压为1。
3) ZnS-H_2O system
ZnS-H_2O系
1.
Combination with the process of lead zinc sulfide minerals\' rich-oxygen leaching,the values of G~0 and the reactions\'ψ-pH formulas of PbS-H_2O system and ZnS-H_2O system were obtained based on thermodynamic calculation respectively,and theψ-pH figures of PbS-H_2O system,ZnS-H_2O system,and PbS-ZnS-H_2O system were drawn when temperature was 160℃,oxygen partial pressure was 1.
结合铅锌硫化矿富氧浸出过程,进行热力学计算,分别得到了PbS-H_2O系、ZnS-H_2O系各物质的G~0值以及该体系下各反应对应的电位-pH表达式,并绘制出温度为160℃、氧分压为1。
5) Portable Batch System (PBS)
PBS系统
6) ZnS-FeS-H_2O system
ZnS-FeS-H2O系
1.
The thermodynamic process of acid pressure leaching of high iron sphalerite is studied and three ε-pH figures of ZnS-H_2O system,FeS-H_2O system and ZnS-FeS-H_2O system at 150℃,1 MPa have been drew,respectively.
对高铁闪锌矿高压酸浸的热力学过程进行了研究,并绘制了150℃、氧气压力为1 MPa时,浸出体系中ZnS-H2O系、FeS-H2O系、ZnS-FeS-H2O系的电位-pH图。
补充资料：PBS
分子式：
CAS号：
性质：液渗透压近似于生理要求又有较强pH缓冲能力的磷酸盐溶液，有不同的配方。常根据有无钙镁离子分为两类。常用的Dulbecco磷酸缓冲液(PBSA)的配方如下(g/L)：KCl，0.20；KH2PO4，0.20；NaCl，8.00；Na2HPO4·7H2O，2.16。
CAS号：
性质：液渗透压近似于生理要求又有较强pH缓冲能力的磷酸盐溶液，有不同的配方。常根据有无钙镁离子分为两类。常用的Dulbecco磷酸缓冲液(PBSA)的配方如下(g/L)：KCl，0.20；KH2PO4，0.20；NaCl，8.00；Na2HPO4·7H2O，2.16。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条