2) The techniques of skin pass mill
冷轧带钢平整工艺
3) Finishing process
整理工艺
1.
Differentiated fabric opportunities for lyocell using innovative dyeing and finishing processes;
新型染色和整理工艺给Lyocell纤维织物提供差别化机遇
2.
Three different moisture adsorption and fast drying finishing agents with aqueous dispersible PE, epoxyresin and organic silicone as the main component respectively have been investigated into their finishing processof polyester fabric and T/C fabric.
以分别用水分散性聚酯、环氧树脂、有机硅三元共聚物为主成分的三种不同组分的吸湿速干整理剂,对涤纶织物和涤棉织物的整理工艺进行了研究。
3.
The experiment results indicate that the optimalfinishing process is the concentration of silk fibroin solution, 10g/L; impregnating for 60min at 85℃.
研究用丝素蛋白对棉织物的整理工艺及棉织物整理前后的各项性能比较。
4) dyeing and finishing technology
染整工艺
1.
With respect to the problem of fiber damage during the processing of pure wool gabardine on old dyeing and finishing equipment, a new dyeing and finishing technology was designed that simplifies wet finishing and accentuate dry finishing.
生产实践表明,配合新的染整工艺,在老机型上同样能生产出质量优良的全毛华达呢面料。
2.
By adopting diffirent dyeing and finishing technology for 25 tex (40Nm) single warp& weft mercerization of sheep s wool light-thin textile fabric and experiment of the usage ofdiffirent auxiliary, find out the reasonable dyeing and finishing technology in order to satisfythe purpose of fabric style.
通过对25tex(40N_?)单经单纬丝光羊毛轻薄织物采用不同染整工艺和不同助剂的对比试验,找出合理的染整工艺,满足面料风格的要求。
5) dyeing and finishing process
染整工艺
1.
Exploration on dyeing and finishing process of superfine polyester knitted fleece;
涤纶超细纤维针织起绒产品染整工艺探讨
2.
Dyeing and Finishing Process of Tencel/Polyester Union Fabric;
Tencel/涤交织面料染整工艺
3.
After introducing the basic concepts of SOAP,its service-oriented architecture and its characteristics,the information integration framework of dyeing and finishing process employing SOAP based on Web service is presented.
SOAP/Web Service架构是新一代分布式应用系统的核心,在简单地介绍了SOAP的基本概念和面向服务的体系架构及其特点后,介绍了运用SOAP技术构建基于Web服务的染整工艺流程信息集成框架。
6) dyeing and finishing
染整工艺
1.
This article discusses the characteristic of modified polyester/Lycra blended fabric,, investigates the factors effecting the product quality and points out the scope of main parameters in dyeing and finishing.
介绍了变性涤纶和莱卡的性能及面料的特色,叙述了他们混纺织物的染整工艺,探索了染整工艺中影响产品质量的因素,指出了染整工艺中主要参数的范围。
2.
The dyeing and finishing process conditions of modal/spandex knitgoods are given based on the characteristics and requirements on dyeing and finishing of modal/spandex yarn.
针对莫代尔/氨纶纱的特点及其对染整加工工艺的要求,给出了莫代尔/氨纶针织物染整工艺条件。
3.
This paper presents dyeing and finishing process of mercerized knitted fabric from natural colored cotton based on production practice.
通过工厂生产实践,给出了彩色棉丝光针织面料的染整工艺。
补充资料：平整
平整
temper
阶消失，同时使平整时产生的加工硬化减小，使板带材的加工性能得到改善。在平整中，通常以延伸率(哟代替冷轧时采用的压下率(:)，如忽略宽展，其间的关系式为 曰 7~了二飞 (于长生)P ingzheng平整(t emPer)对冷轧后并经过退火的板带材进行的小压下率的冷轧。一般不向板带材和轧棍喷射润滑油和冷却水，压下率为0.5%一4%。为了提高防锈性和改善表面质量，平整冷轧板带钢时，多采用水溶性和油溶性的防锈剂作为平整液，压下率可达10%。平整可提高板带材板形的平直度，改变表面粗糙度，消除或缩小退火板带材明显的屈服台阶、防止供冲压时表面出滑移线(见滑移)和断裂。早期的带卷平整机为单机架，为了提高硬度、改善表面粗糙度和生产超薄的镀锡板，出现双机架平整。平整机的轧辊尺寸、附属设备、轧制速度同冷轧机相似。平整压下率很小，一般多采用单辊传动，避免由于辊径差造成速度和扭矩的差异，降低平整质量和造成设备事故。深冲钢平整时的变形率一般采用。.6%一1.4%，用于包装的薄板带一般平整率约为l%~3%。有时还进行强化变形，其目的除了抑制滑移线倾向，以使轧件不断裂外，还要使板带达到一定的硬度。在平整薄板带和极薄板带时，常将平整变形分配在两个道次上，变形不均匀性将增大。在不均匀变形时，随着平均平整率的减小，可使屈服台
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条