1) pure zinc bath
纯锌液
1.
Corrosion behaviors of a austenitic alloy with boron for rolls in pure zinc bath and galvanizing bath were carried out in this work in order to better understand the reaction mechanism.
本文系统地研究了含硼奥氏体多元合金在纯锌液中的静态腐蚀行为和在工业锌液中的动态腐蚀行为,并探讨了其耐锌腐蚀机理。
2) passivation of zinc plating
镀锌纯化液
3) pure Zinc
纯锌
1.
Deformation and damage behavior of coarse-grained pure zinc under unidirectional tension and compression;
单向拉伸与压缩时粗晶纯锌的形变及损伤行为
2.
A study has been performed on micromechanisms of cyclic deformation and fatigue damage in pure Zinc and TC4 Titanium alloy under low-cycle impact fatigue (LCIF) loading.
研究了六方金属纯锌和TC4钛合金在低周冲击疲劳载荷下的循环变形和损伤机制。
3.
Electrorefining of hot galvanizing slag to produce pure zinc is a completely new technology.
热镀锌渣电解精炼制取纯锌 ,是处理热镀锌渣的全新工艺。
4) High purity zinc
高纯锌
1.
A new process of using ammonia and ammonium chloride solution to leach zinc oxide fume dusts and electrowinning high purity zinc was explored successfully.
开发了用NH3 NH4 Cl水溶液浸出炼铅炉渣烟化炉氧化锌烟灰制取高纯锌的新工艺。
2.
The three main methods for high purity zinc preparation,including electrolytic method,vacuum distillation,zone refining,are summarized and compared in this paper.
本文对目前高纯锌的三种主要制备方法(电解法、真空蒸馏法、区域熔炼法)进行了综述和比较。
3.
The results show that the anti-corruption ability of the high purity zinc reference electrode is more better than the o.
本文采用极化曲线等电化学方法研究了高纯锌在模拟土壤孔隙液中,温度、阳极极化电流、氧分压对锌电极电位的影响,以及XRD和失重法验证模拟土壤孔隙液试验的可行性。
5) high-purity zinc
高纯锌
1.
In this article a new process of using ammonia and ammonium chloride solution to leach zinc calcine and electrowinning high-purity zinc has been developed successfully.
利用NH3-NH4Cl水溶液浸出锌焙砂来制取高纯锌。
2.
In this article treating complex zinc oxide materials and preparing high-purity zinc are the primary objects of this study.
本文针对目前氟、氯、铁等杂质元素高的氧化锌物料、氧化锌矿常规方法难以处理以及无汞合金锌粉用高纯锌必须由0号锌用真空蒸馏或精馏法生产的问题。
3.
Under the conditions of the polar distance between different electrodes 40ram, electrolytic temperature 30℃, the adequate components of electrolyte and content of every component were selected through study on components of electrolyte from the production of high-purity zinc.
在异极间距40mm,电解温度30℃的条件下,通过对高纯锌生产的电解液组分的研究分析,从中选择出合适的电解液组分和电解液中各组分的含量。
6) pure zine particle
纯锌粒
补充资料：表面合金化镀锌钢板
表面合金化镀锌钢板
surface-alloyed galvanized steel sheet
裹面合金化镀锌钢板(surfaee一alloyedgalvanized steel sheet)由普通镀锌钢板经合金化处理而成的钢板。其镀层表面呈银白色，具有良好的耐蚀性、加工工艺性和涂装性，可焊性也比普通镀锌钢板好。其镀层结构主要受扩散、退火温度、时间、镀锌层厚‘望以及镀液中锌含量等因素的影响。不同的工艺条件，可使合金化层形成不同的相结构。合金化镀锌钢板的使用性能与镀层结构有密切关系。铁一锌合金化层中，铁的含量对合金化层的耐蚀性、涂装性及加工性有重要影响。从综合性能考虑，以镀层中含铁8%时为最佳。 合金化镀锌钢板可简化表面处理工序.省去酸洗、喷砂等工序，有较好的经济效益。在农业机械产品上的应用有:施肥机械、施肥播种机、中耕施肥机的肥料箱和种子箱:手扶拖拉机的带轮罩壳等薄板件;金属粮仓的仓体、仓盖等;种子加工机械的窝眼筒、筛板等;农用汽车的薄板件;谷物和茶叶烘干机的薄板件等。(王广扬)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条