1) Tangential turbine flowmeter
切向涡轮流量计
1.
Tangential turbine flowmeter is a kind of velocity type flowmeter, it hasmany advantages，such as high precision, easy to use, good adaptability and digitalsignal output.
切向涡轮流量计是一种速度式流量计,具有精度高、使用方便、适应性强、数字信号输出等优点。
2) turbine flow-meter
周向涡轮流量计
3) tangential type turbine flow sensor
切向式涡轮流量传感器
1.
In order to study the operating principle of tangential type turbine flow sensor,the rotor driving torque was deduced and the meter factor was given.
为深入研究切向式涡轮流量传感器的工作机理,推导了流体对涡轮叶片的驱动力矩,得出切向式涡轮流量传感器仪表系数的数学表达式。
4) turbine flowmeter
涡轮流量计
1.
Analysis on influence factor of the turbine flowmeter in multiphase flow measurement;
多相流测量中涡轮流量计的影响因子分析
2.
Analysis of starting flow of turbine flowmeter;
涡轮流量计始动流量的分析
3.
Based on the introduction of VCM charging process and the analysis on properties of VCM,the selection,installation and application of turbine flowmeter and mass flowmeter were introduced,and problems occurring during their usage and solutions were summarized.
通过对氯乙烯单体加料工艺的介绍和氯乙烯单体性质的分析,介绍了涡轮流量计和质量流量计的选型、安装和使用情况,总结了使用过程中遇到的一些问题及处理办法。
5) turbine meter
涡轮流量计
1.
In the producing process,the outcome of the turbine meter is larger than the oil measurement in the well head for the influence of the gas from the oil well.
在油田生产过程中,由于油井产出气的影响,涡轮流量计测得的产量要比井口量大很多。
2.
This article solves some problems of the turbine meter in pump capacity measurement through its working principle,structure,features and installation.
涡轮流量计因其精度高、重复性好、抗干扰能力强、测量范围度宽、结构紧凑等优点,在流量测量中得到广泛应用。
3.
High-performance displacement or turbine meters are normally used to meter custody transfers of petroleum liquids.
高性能的容积式流量计或者涡轮流量计通常被用于原油的交接计量。
6) turbine flow meter
涡轮流量计
1.
The viscosity of the fluids has a great of effects on turbine flow meter s factor.
流体的粘性对涡轮流量计的仪表系数有很大影响。
2.
Custody transfer metering skid adapts turbine flow meter to measure crude oil flow rate.
计量橇采用涡轮流量计作为流量检测仪表,流量信号上传到流量计量管理系统,从而实现流量的交接计量和在线自动标定。
补充资料：涡轮流量计
采用涡轮进行测量的流量计。它先将流速转换为涡轮的转速，再将转速转换成与流量成正比的电信号。这种流量计用于检测瞬时流量和总的积算流量，其输出信号为频率，易于数字化。图中感应线圈和永久磁铁一起固定在壳体上。当铁磁性涡轮叶片经过磁铁时，磁路的磁阻发生变化，从而产生感应信号。信号经放大器放大和整形，送到计数器或频率计，显示总的积算流量。同时将脉冲频率经过频率－电压转换以指示瞬时流量。叶轮的转速正比于流量，叶轮的转数正比于流过的总量。涡轮流量计的输出是频率调制式信号，不仅提高了检测电路的抗干扰性，而且简化了流量检测系统。它的量程比可达10:1,精度在±0.2％以内。惯性小而且尺寸小的涡轮流量计的时间常数可达0.01秒。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条