1) 16Mn/Q345 steel
16Mn/Q345钢
1.
Corrosion failure analysis tests indicated that the material of gathering pipeline rupture elbows was 16Mn/Q345 steel, whose chemical compositions accord with the national standard.
失效分析试验结果表明:集输管道损伤弯头的材质为16Mn/Q345钢,化学成分符合国家标准。
2) Q345 steel
Q345钢
1.
Continuous cooling transformation curve of undercooling austenite about Q345 steel
Q345钢奥氏体连续冷却转变曲线(CCT图)
2.
The fracture toughness and fatigue crack growth rate of Q345 steel were studied.
分别对Q345钢J积分值和裂纹扩展速率进行了测定。
3.
An experimental study on Q345 steel coming from 10 factories at 600 ℃ degree were carried out with transient tests.
采用恒载升温试验方法,对国内10个厂家生产的Q345钢试件在600℃下进行40次有效试验,得到每批次试件在不同荷载下变形随时间的变化曲线。
3) 16Mn steel
16Mn钢
1.
Contrast Research on the Inclusions and Grain Sizes in 16MnR(HIC) Steel and 16Mn Steel;
16MnR(HIC)和16Mn钢中夹杂物和晶粒度的对比研究
2.
A study on corrosion inhibition of 16Mn steel under thin electrolyte film with H_2S;
16Mn钢在含H_2S的薄层液膜下的缓蚀研究
3.
Failure analysis on 16Mn steel elbow for oil and gas gather-transport pipeline
16Mn钢油气集输管线弯管失效分析
4) structural steel Q345
Q345结构钢
6) Q345 angle steel
Q345角钢
1.
The abnormality of tensile strength of Q345 angle steel was observed through mechanica test.
通过力学试验,发现Q345角钢抗拉强度异常,进行化学成分、低倍、显微组织和夹杂物检验,发现角钢边部存在夹层(偏析),夹杂物严重,从而导致角钢强度下降,出现性能异常。
补充资料：[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式：C16H16ClN3O3S
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条