1) continues purlin
连续檩条
1.
At present,the continuous purlin devise by handworked or ogo experience,for this reason affect the structure of security and economy,therefore,this dissertation research and develop a kind of structure CAD systems for design continues purlin.
通过研究发现连续檩条比简支檩条具有较高的承载力和较大的刚度,能有效降低用钢量,因此连续檩条应用也越来越多。
2.
Combining with Canada,the United States and China norms,proposes the most disadvantaged form of continues purlin load distribution for cold-formed steel,in order to enable cold-formed steel continues purlin design of more economic and rational.
我国现行钢结构设计规范及规程中对连续檩条的设计存在很多不足。
2) lapped continuous batten
搭接式连续檩条
1.
The test results of 27 specimens show that the bearing capacity of lapped continuous battens is related to the stiffness of overlapping part,bending moment,effective section modulus and so on.
对550MPa高强冷弯薄壁型钢帽型截面搭接式连续檩条受力性能进行了试验研究。
2.
Therefore,it is uneconomic to increase the ultimate load capacity of lapped continuous battens only by increasing the lap length.
对550 MPa高强冷弯薄壁型钢帽形截面搭接式连续檩条试验试件进行了ANSYS有限元模拟,并在此基础上进行了参数分析。
4) purlin
[英]['pə:lin] [美]['pɝlɪn]
檩条
1.
The FEA on diaphragm-braced C-shape purlin;
蒙皮支撑C型檩条的有限元分析
2.
The application of continuous purlin of cold-formed thin-walled steel in light-weight steel structure;
冷弯薄壁型钢连续檩条在轻钢结构中的应用
3.
Experimental study on stability bearing capacity of purlin under wind suction in the hangar of TAECO;
厦门太古飞机库檩条在风吸力作用下稳定承载力的试验研究
5) purline
[英]['pə:lain] [美]['pɝlaɪn]
檩条
1.
Based on the experience of design,a number of problems that need to be dealed with carefully are pointed out which contins:apply-extension, the bracing system,place purline .
结合工程设计实践,对门式刚架轻钢结构设计中应注意的一些问题如应用范围、支撑体系、檩条布置等进行探
2.
In this paper,detailed steps and key points in designning of light-gauge steel framing will be introduced, including column spacing selection of portal frame, structure system layout, selection of load value, material selection, design of portal frame structure and its members, and design of brace, column brace and purline.
结合多年设计经验,总结了轻型钢结构厂房的设计要点、思路和步骤,介绍了门式刚架柱网尺寸选择及结构体系布置、荷载取值、结构和构件设计、材质选择、柱间支撑、檩条、墙梁、拉条等设计要点,提出一些在设计中应注意的问题和建议,供同行参考。
3.
This article mainly is through checking computations the load on the metope purline of the Big Span in the Jiugang thermoelectricity technical alteration engineering workshop,proves the metope purline s span of the light steel structur can advance 8m on the conventional 6m in Jiayuguan.
本文主要通过对热电技改工程厂房墙面大跨距檩条的荷载验算,初步证明在嘉峪关地区的轻钢结构围护檩条跨距可以由传统的6 m提高到8 m。
6) timber purlin
木檩条
补充资料：连续式操作循环式结晶器
分子式：
分子量：
CAS号：
性质：又称奥斯陆结晶器（Oslocrystallizer)。饱和溶液由加料管连续进入，经循环管通过冷却器而变为过饱和。过饱和溶液沿着进入结晶器的底部，并向上流动，与悬浮的晶体接触，进行结晶而解除过饱和。晶体与溶液一同循环，颗粒不断长大，直至其沉降速度大于循环溶液的上升速度时而降落器底，由排出口连续排出。所希望的晶体大小，可通过改变溶液的循环速度和在冷却器中热量的去除速度加以调节。广泛应用于生产需要控制颗粒大小的晶体以及量大的晶体。
分子量：
CAS号：
性质：又称奥斯陆结晶器（Oslocrystallizer)。饱和溶液由加料管连续进入，经循环管通过冷却器而变为过饱和。过饱和溶液沿着进入结晶器的底部，并向上流动，与悬浮的晶体接触，进行结晶而解除过饱和。晶体与溶液一同循环，颗粒不断长大，直至其沉降速度大于循环溶液的上升速度时而降落器底，由排出口连续排出。所希望的晶体大小，可通过改变溶液的循环速度和在冷却器中热量的去除速度加以调节。广泛应用于生产需要控制颗粒大小的晶体以及量大的晶体。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条