1) curing and foaming
硫化发泡
1.
The SBR foaming materials with clay as reinforcing filler which was modified by coupling agents such as aluminate, silane and borate were prepared followed the procedures of coupling modification, mixing, plasticizing, twin-roll mixing, curing and foaming.
以SBR为基体原料,陶土为增强填充料,铝酸酯、硼酸酯、硅烷为偶联剂,通过偶联改性、密炼共混、双辊混炼、硫化发泡方法制备SBR发泡材料。
2) chemical foaming
化学发泡
1.
Through industrialized experimentation with H foaming agent and NaNO_2 foaming agent at non-stop automated joint production line,the factors affecting foaming quality of emulsion explosives are establish and the appropriate methods of chemical foaming are got.
通过对H发泡剂和亚硝酸钠发泡剂在全连续自动化联建生产线上的工业化试验,找出影响乳化炸药发泡质量的原因和对策,制定出合适的化学发泡方法。
2.
The cells of MM were smaller and uniformer than those of the prepared open foam for chemical foaming and the permanent compressing set was small, 4%～6%.
介绍了制备开孔硅橡胶泡沫的一种独特方法 ,该方法的工艺时间比传统的物理发泡时间短 ,具有更强的可操作性 ,减少了物理发泡剂的浪费 ,制备的泡沫开孔率与普通物理发泡的开孔型泡沫相当 ,与化学发泡制备的开孔型泡沫相比 ,泡孔细小均匀 ,且具有较小的压缩永久变形 (4 %～ 6 %
3.
The water gel explosive is manufactured under special technological conditions in which the chemical foaming is instead of conventional expanded perlite used and hence the explosive density is adjusted,the cost is lowered and the quality of the explosive is improved.
在适应水胶炸药特殊制造工艺条件下 ,研制出新的化学发泡技术取代膨胀珍珠岩 ,调节炸药密度 ,攻克了原有缺陷 ,降低了成本 ,提高了产品质
3) emulsifier foaming
乳化发泡
4) Sulphuration volatilization
硫化挥发
5) sulfide staining
硫化发黑
6) pure chemical foaming
纯化学发泡
1.
Study on the low-compression-stress-relaxation silicone rubber foam using the pure chemical foaming technology;
纯化学发泡技术在低压缩应力松弛硅橡胶泡沫材料研制中的应用研究
补充资料：化学发泡
分子式：
分子量：
CAS号：
性质：利用某些聚合物基体本身的部分分解或加入某些物质的分解所产生的气体，使聚合物基体形成泡孔结构的方法。与物理发泡不同。物理发泡是聚合物基体或加入的物质不发生化学变化而发泡。
分子量：
CAS号：
性质：利用某些聚合物基体本身的部分分解或加入某些物质的分解所产生的气体，使聚合物基体形成泡孔结构的方法。与物理发泡不同。物理发泡是聚合物基体或加入的物质不发生化学变化而发泡。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条