1) Complex operator reserves
储量复算
2) reserve estimation
储量计算
1.
Evaluating exploration of complicated lithologic oil reservoir and its reserve estimation;
复杂岩性油藏的评价勘探及储量计算研究
2.
As a method of reserve estimation and economical evaluation of the deposit, the software has been used widely for its adva.
利用地质统计学的原理和方法 ,编制出矿床数学 经济模型软件包 ,它作为一种储量计算和矿床经济评价方法。
3) reserve estimation
储量估算
1.
Through the detailed investigation and research to this solid minerals reserve estimation process, this paper researched about the calculation method of single project circled of reserve estimation process, ore body section link, and the traditional reserve estimation method, such as geological block and section calculation method.
通过对固体矿产储量估算过程的详细调研,对储量估算过程中的单工程圈定算法、矿体剖面连接以及传统的储量估算方法中的平行剖面法和地质块段法做了详细研究,并针对储量计算的可视化及交互技术进行了研究,实现了一种基于Windows操作系统、MapGIS地理信息系统平台的固体矿产储量估算原型系统,实现了对固体矿产勘查数据的有效存储、管理、可视化分析及评价。
2.
In coal resource and reserve estimation,vertical depth of weathering and oxidation zone is all determined by coal quality testing indices,but no specific rules to determine width of weathering and oxidation zone on coal floor contour map.
在煤炭资源储量估算中,煤层风氧化带垂深都是根据煤质化验指标来确定,对在煤层底板等高线上如何确定煤层风氧化带宽度没有明确的规定,为此,依据实际工作中遇到的三种地质情况:地表基本平坦;地表有倾角且倾向与煤层倾向相同;地表有倾角且倾向与煤层倾向相反,分别用制图法、计算法确定其煤层风氧化带的宽度。
4) Reserve calculation
储量计算
1.
Application of Monte Carlo method in Jixiangtun gas reservoir reserve calculation;
蒙特卡洛法在吉祥屯气藏储量计算中的应用
2.
Studies on reserve calculation method for fractured-vuggy reservoir of buried hill;
缝洞型潜山油藏储量计算方法研究
3.
Comparative Analysis about Reserve Calculation Methods Kriging and SD
储量计算克立格法与SD法的对比分析
5) reserves calculation
储量计算
1.
Discussion on reserves calculation using gridding method;
网格法在储量计算中的应用
2.
Study on geophysical parameters in reserves calculation of in-situ leachable sandston-type uranium deposits;
可地浸砂岩型铀矿储量计算中的物探参数研究
3.
The method can be applied in different type deposits and every stage from ore surveying to exploration,and is a tool for reserves calculation and assessment.
SD法创立于20世纪80年代初,它是一种以SD动态分维几何学为理论,以最佳结构地质变量为基础的储量计算方法;SD法适于不同矿种及矿产勘查开采各个阶段,是储量计算、矿业评估评审的一种工具;它创造性的提出精度概念,对所计算的结果以及施工工程数进行预测;通过对SD法与传统法在单工程矿体圈定、计算范围、品位厚度计算方式、特高品位处理及图件输出等方面的对比,对SD法计算系统的优点与不足进行了说明,实践证明,SD法能较好的适用于金矿勘查区的储量计算。
6) reserves estimation
储量计算
1.
Mathematical model of ore deposit was established by applying MICROMIME software and geostatistics method,variation functions was calculated via the analysis of statistical distribution features for copper grade,estimation was made based on the grade and reserves calculated,then a conclusion is drawn that geostatistics is advanced and practical in reserves estimation.
利用MICROMINE矿业工程软件,运用地质统计学方法,通过分析某铜矿铜品位的统计分布待征,进行变异函数计算,建立了矿床的数学模型,并在此基础上进行品位估值和储量计算,认为运用地质统计学计算储量具有先进性及实用性。
2.
On the basis of the oil-water differential separation principles,the study of petroleum reserves estimation for Wangchang Oilfield and the relative formula conduced can increase the precision of the reserves estimation and provide credible data to the oilfield exploration.
从油水分异原理出发,对王场油田油水过渡带储量进行了研究,推导出了油水过渡带储量计算相关方程,并对王场油田油水过渡带储量进行了计算,不同方法所计算的地质储量相差甚远。
3.
Therefore the study of log evaluation and reserves estimation for these measures has important economic si.
本论文结合松辽盆地大庆油田外围具有重要勘探开发前景的扶杨油层进行了测井评价方法和储量计算方法研究。
补充资料：储量
1.储藏的数量。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条