1) cascade constraint control
串级约束控制
2) cascade control
串级控制
1.
Study on dual rate-loo Pcascade control for LOS stabilization of gyro inertia platform;
陀螺惯性平台视轴稳定双速度环串级控制的研究
2.
An application of PID cascade control in fermentative processing;
预测-PID串级控制在发酵过程中的应用
3.
The design of a cascade control system based on LabVIEW and PLC;
基于LabVIEW与PLC的串级控制系统设计
3) serial control
串级控制
1.
The serial control of the compressors discharge pressure;
压缩机排气压力的串级控制
2.
Based on describing the constitution and work principle of SUPCON WebField JX-300X DCS,this paper discussed the control process of the system in Baota gas-fractionation,expounded further the advance of the control system and importance of the serial control.
在介绍该控制系统的组成和工作原理的基础上,详细论述了WebField JX-300X DCS在宝塔气分上的控制过程,进一步阐述该控制系统的先进性和串级控制的重要性。
3.
A scheme of design of composite fuzzy serial control system is presented keeping the anti jamming function of serial control and the good dynamic characteristic of fuzzy control based on the analysis of the characteristic of superheated steam temperature of thermal power station.
在对火电厂过热汽温控制对象特点分析基础上 ,保留串级控制抗内扰的性能 ,结合模糊控制动态特性好的特点 ,提出了一种复合模糊串级控制设计。
4) series control
串级控制
1.
The PID series control algorithm with generalized forecasting compensation-autocorrection has been adopted in the temperature controling system of quenching and ageing stores for the heat treatment of aluminium alloy after its moulding.
针对铝合金胚料模压成型后的热处理,在淬火炉及时效炉的温度控制系统中,采用广义预测补偿-自校正PID串级控制算法,大大提高了温控精度及稳定性,提高了产品质量,降低了电能损耗。
2.
It uses SCM as the primary computer, and through the series control it realizes to control those objects having the nature of large time-delay in the sense of software designs,it uses the thought of modularization and adopts C language for the application program of SCM.
该控制器以单片机为主控机,运用串级控制实现对大滞后、大时延对象的控制。
3.
The good result could be achieved by using the PID series control and adjusting PID Parameters.
电容器真空干燥过程中,对温度的控制要求较高,不能采用简单的单回路控制,采用PID串级控制并调节合适的PID参数能收到较满意的效果。
5) Constrained control
约束控制
1.
At the same time, an inferential control scheme with constrained control based on soft-sensor was designed.
同时并根据实际的质量控制目标,设计了一个基于软测量的推断控制方案,并在推断控制算法中增加了约束控制功能,增强了控制系统的可靠性和实用性。
2.
A constrained control system on two OXO reactors was implemented based a modular multivariable predictive control algorithm.
提出了一种模块多变量预测控制算法 ,实现了两个并列运行的羰基合成反应器的约束控制 ,使两个反应器出口的CO分压都保持在工艺约束范围内 ,同时将反应器进料配比控制在反应器在线操作优化软件给出的最佳值附近。
3.
A method was proposed in the paper that the output error curve in constraint zone is between(y sp -y)by setpoint control and zero by conventional treatment for constrained control,and can be designated with an exponent n(≥1)for different purposes.
针对约束控制中输出偏差处理方法 ,一改过去约束区间内输出偏差为 0、区间外为e =ysp -y的简单处理方法 ,提出的新方法可以避免在约束边界上跳变 (偏差函数连续 )、保证测量值尽量往中心给定值靠近。
6) constraint control
约束控制
1.
Research on constraint control method by feature-based multi-resolution modeling
基于多分辨率特征造型模型的约束控制方法研究
补充资料：疬串
疬串
疬串 病名。瘰疬之。马刀挟瘿的俗称。日本·丹波元简《灵枢识》卷六：“马刀蛤蛎之属，痈形似之，挟瘿者发于结瘿之处，大迎之下，颈侧也。二痈一在腋，一在颈，常相连络，故俗名疬串。”可参见马刀挟瘿条。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条