1) Thermal spray coating
电热喷涂
2) electrical explosion spraying
电热爆喷涂
3) electric-arc thermal spray coating
电弧热喷涂
1.
The thesis expatiates on surface protection technology, electric-arc thermal spray coating, one of theearliest spray coating processes for metal materials, and its application in material anticorrosion.
本文叙述了表面技术——电弧热喷涂技术在材料防腐上的应用。
4) electrothermal explosion spraying
电热爆炸喷涂
1.
Experiment study of in-situ synthesis MoSi2 coatings using electrothermal explosion spraying method;
电热爆炸喷涂法原位合成MoS_2i涂层的试验研究
2.
Preparing TiC-NiAl composite coating using electrothermal explosion spraying method;
电热爆炸喷涂法制备TiC-NiAl复合涂层的试验研究
3.
In-situ synthesis of FeAl and Fe3Al intermetallics coating was carried out by electrothermal explosion spraying pure aluminium to Q235 steel substrate,and the coating was analyzed by XRD,SEM,EDS and microhardness tester.
利用电热爆炸喷涂装置将纯铝喷涂到Q235钢基体上原位合成FeAl和Fe3Al金属间化合物涂层,通过X射线衍射仪、扫描电镜、能谱仪和显微硬度计对涂层的物相进行了分析。
5) thermal sprayed coating
热喷涂涂层
1.
The wear resistance of three kinds of thermal sprayed coatings under stable loading and dynamic loading was examined with a reciprocal sliding test rig and an impact scratching tester, respectively.
通过采用平稳加载往复滑动和动态加载冲击划痕 2种试验条件 ,研究了以钴基合金为重点的 3种热喷涂涂层的耐磨性 ,并初步探讨了其磨损机理 。
2.
The results indicated that Matlab software to characterize thermal sprayed coating is feasible and reliable.
基于Matlab的图像处理功能,提取了等离子喷涂Fe涂层中扁平粒子和氧化物的轮廓,并对等离子喷涂TiO2涂层的孔隙率进行了测量,其测量结果与直接称量法的测量结果进行了对比,结果表明采用Matlab的图像处理功能表征热喷涂涂层结构,其方法简单可行,测量涂层孔隙率结果稳定性好。
6) thermal spray
热喷涂
1.
Modification of thermal sprayed NiAl intermetallic coatings with rare earth elements;
稀土改性热喷涂NiAl金属间化合物涂层
2.
The failure of thermal spray coating of hearth rolls in continuous annealing furnace and the powder material;
连续退火炉辊热喷涂涂层失效方式与涂层材料使用
3.
The Effects of rare earth in thermal spraying;
稀土在热喷涂(焊)中的运用
补充资料：电热
利用电能加热：～杯ㄧ～毯。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条