1) Compact tension (CT) specimens
紧凑拉伸(CT)试样
2) compact tension specimen
紧凑拉伸试样
1.
Studies on loading-point displacement for compact tension specimens
紧凑拉伸试样加载点位移研究
2.
To study the performance of SiC/Al Functionally Gradient Material(FGM),the numerical simulation analysis on the creep performance of three-point bending and compact tension specimen of SiC/Al FGM with four gradient layers is done under the thermal load and mechanical load coupling with thermal load by using ANSYS.
为研究SiC/Al梯度功能材料(Functionally Gradient Material,FGM)的性能,采用ANSYS分别对具有4个梯度层的该种材料的3点弯曲试样和紧凑拉伸试样,在热载荷和机械载荷热载荷共同作用下的蠕变性能进行数值模拟分析,得到不带微裂纹、带垂直梯度方向微裂纹和平行梯度方向微裂纹的SiC/AlFGM试样在这两种工况下的蠕变应变随坐标位置及时间变化曲线。
3) compact tension specimen
紧凑拉伸试件
1.
A practical model to estimate fracture toughness of concrete was developed by utilizing the equilibrium of forces at the cracked section in unstable fracture state of compact tension specimen, where the softening feature of concrete was taken into account.
根据混凝土的软化特性,通过紧凑拉伸试件失稳断裂破坏临界状态的力学分析建立了混凝土断裂韧度的解析计算模型。
4) compact tension
紧凑拉伸
1.
The results showed that the KIC of the compact tension specimens of L-R orientation was evidently higher than that of the compact tension specimens of R-L orientation and C-R orientation.
结果表明:L-R取向的紧凑拉伸试样的KIC明显高于R-L取向和C-R取向。
5) compact specimen
紧凑试样
1.
A compact specimen is put to the fracture test under tension-shear combined loading.
本文利用紧凑试样在拉-剪复合加载下进行了断裂试验。
6) compact tension shear
紧凑拉伸剪切
1.
In this article,the photoelasticity is tested by using compact tension shear specimen.
本文采用紧凑拉伸剪切试样作了光弹性测定。
补充资料：“奥托”76毫米/62紧凑型舰炮
“奥托”76毫米/62紧凑型舰炮是台湾从意大利购进的海军武器，用在"阳"字号驱逐舰上。射程为对海16公里，对空12公里，发射率每分钟10－85发，弹重6公斤，炮重7．5吨。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条