1) FSPM
开关磁通永磁同步电机
1.
Flux-switching Permanent Magnet (FSPM) Synchronous motor system is a kind of controllable variable-speed system and it is composed of the motor, power driver, controller, and the rotor position detector.
开关磁通永磁同步电机系统是一种可控交流调速系统,由电机本体、功率驱动器、控制器和转子位置检测器四部分组成。
2) controllable-flux permanent magnet synchronous machine
可控磁通永磁同步电机
1.
Through the experiments on the static magnetic circuit device that simulates the magnetic circuit working mechanism of the interior composite-rotor controllable-flux permanent magnet synchronous machine,the laws of action spot change of NbFeB and AlNiCo PMs in the process of magnetization and after magnetization were studied,and the principle of the permanent magnet controllable-flux was revealed.
通过对模拟内置混合式转子可控磁通永磁同步电机磁路工作机理静止磁路装置的试验,认知了两种永磁体磁化过程和磁化后工作点的变化规律,揭示了磁通可控原理。
3) PMSM
永磁同步电动机
1.
DESIGN OF FULL ELECTRICAL INJECTION MOLDING MACHINE BASED ON PMSM;
基于永磁同步电动机的全电动注塑机控制系统设计
2.
Sensorless Control System for PMSM Based on Sliding Mode Technique;
一种基于滑模观测器的低速大转矩永磁同步电动机无传感器控制方法研究
3.
Full Sliding Mode Control of PMSM;
永磁同步电动机的完全滑模变结构控制
4) permanent magnet synchronous motor
永磁同步电机
1.
Study and Simulation of Direct Torque Control System for Permanent Magnet Synchronous Motor;
永磁同步电机直接转矩控制系统研究与仿真
2.
RBF neural network based on-line discrimination and model reference self-adaptive control for permanent magnet synchronous motors;
基于RBF神经网络的永磁同步电机在线辨识与模型参考自适应控制
3.
Direct torque control for permanent magnet synchronous motor based on space voltage vector pulse width modulation;
基于SVPWM的永磁同步电机直接转矩控制
5) permanent magnet synchronous motor
永磁同步电动机
1.
Controlling chaos in permanent magnet synchronous motor via sliding mode scheme;
永磁同步电动机中混沌运动的滑模变结构控制
2.
Study on control of permanent magnet synchronous motor based on DSP;
基于DSP的永磁同步电动机控制系统的研究
3.
Based on neural network permanent magnet synchronous motor speed system simulation;
基于神经网络永磁同步电动机调速系统的仿真研究
6) PMSM
永磁同步电机
1.
Study on high speed operation of sensorless PMSM drive system;
无传感器永磁同步电机调速系统高速运行性能研究
2.
Design of novel intelligent vector controller for PMSM;
永磁同步电机新型智能矢量控制器设计
3.
Modeling and Simulation of PMSM Vector Control System Based on MATLAB/Simulink&SimPowerSystems;
基于MATLAB/Simulink&SimPowerSystems的永磁同步电机(PMSM)矢量控制系统建模与仿真
补充资料：开关
开关
kaiguan
开关(kaiguan)针灸穴名。出《司牧安驹粼》o牛又称牙关穴，出《抱搜滚》。猪称颊车穴，羊称牙关穴，见《件医针灸手册》。位于颊部，口角后上方咬肌前缘的凹陷处;马在第四臼齿相对的皮肤表面，刺入咬肌前缘，上下臼齿间的颊肌内.有面动、静脉及颊神经分布，牛在第三对臼齿稍后上方，刺入咬肌部，有颊背及颐浅神经和面横动、静脉，以及咬肌动、静脉;猪在第三对臼齿间;羊在咬肌前缘上下臼齿间。左右侧各一穴。用火针、圆利针向后上方刺入，马2一3厘米，羊、猪。.6一l厘米，牛向上方刺入2一3厘米;毫针蒯入马6~9厘米，牛3一4.5厘米，猪1.5一3厘米，羊1厘米。或向前下方透刺锁口。羊、猪还可用艾灸、火烙。具有硫风通络，顺气开胃作用。主治破伤风、牙关紧闭、歪嘴风、颊肿和马颐肌强直、牛咽喉炎、消化不良。(孙永才)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条