1) Executing Mechanism of Plug Stick
塞棒执行机构
2) cylinder operator
活塞式执行机构
3) plug valve electricity liquid actuator
塞阀电液执行机构
1.
Through comparing at the aspect of function,principle,electric and structure etc of plug valve electricity liquid actuator at home and abroad,the shortcomings that the internal product exist are found out and the definite improvement direction for the product is put forward.
通过兰炼产塞阀电液执行机构与美国TAPIC塞阀电液执行机构性能、原理、电气、结构等方面的比较 ,找到我国与美国TAPIC产品之间的差距 ,为我们产品的改进提出了明确的方
4) pneumatic piston actuating mechanism
气动活塞执行机构
5) executive mechanism
执行机构
1.
The executive mechanism of Cu-Al pipe butt welder,based on above,was designed,including its air system and mating clamper.
在此基础上,设计了铜铝管对焊机的执行机构,包括其气动系统和配套夹具。
2.
In order to improve the running smoothness of mesh-belt and reduce the wear between mesh-belt and traction wheel, on the base of completing the design scheme of mechanical system in heat treatment furnace with mesh-belt conveyer, the dimension synthesis of the executive mechanism is accomplished and the main sizes of the mechanism are given.
为了改善网带输送式热处理炉在工作过程中网带运行的平稳性,减小网带与鼓轮间的磨损,在确定了网带输送式热处理炉机械系统改进方案的基础上,对执行机构进行了尺度综合,给出了机构的主要尺寸参数。
3.
For the swinging cylinder type of hydraulic wrench, through the analysis and calculation for the locating parameters of its executive mechanism, formula and design precondition of the locating parameters are presented, with which the minimum of pushing force of the oil cylinder can be achieved under definite swinging angle and given loosening & tightening torque for the fasteners.
通过对摆动油缸式液压扳手执行机构位置参数的分析推导 ,给出其位置参数的计算公式和设计条件。
6) actuator
[英]['æktʃueitə] [美]['æktʃʊ,etɚ]
执行机构
1.
Linearization Research on Hydraulic Actuator of Diesel Engine Active Vibration Isolation System;
柴油机主动隔振系统液压执行机构线性化仿真与试验
2.
Application of STF theory to autonomous underwater vechicles actuator faults;
强跟踪滤波器在AUV执行机构故障诊断中的应用
3.
Connection between actuator and controller;
执行机构与控制装置的联接
补充资料：塞棒
塞棒
stoppe
saibang塞棒(s topPer)装在盛钢捅内靠升降位移控制水口开闭及钢水流量的耐火材料棒，又称陶塞杆。它由棒芯、袖砖和塞头砖组成。棒芯通常由直径为30一6omm的普碳钢圆钢加工而成，上端靠螺栓与升降机构的横臂联结，下端靠螺纹或销钉与塞头砖连接，中间套袖砖。图为塞棒结构及升降装置示意图。塞棒须仔细砌筑，并经48h以上的烘烤干燥后使用，以避免耐火材料炸裂造成漏钢事故。 .”闯一1二鱿蒙一一~塞杆 怜佣~}睁卜一一袖砖泌熟件__.砚朴 少秘哩名刁一一-销钉甘一一~一介豹—引卜-一支柱 梦l姗鲤._插销}月朴l{{黝丫 l肠l!十一-塞头}塞棒朋}{}l{固定缚检 \\节，仁，产塞头螺栓!朋{{队鼓了.二k、 绷一水口)至粼蛛 塞棒结构及其升降装置示意图 (孟凡钦)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条