2) plasma spraying
等离子喷涂
1.
Microstructure and property of Al_(65)Cu_(23)Fe_(12) coating prepared by plasma spraying;
等离子喷涂Al_(65)Cu_(23)Fe_(12)涂层的组织与性能研究
2.
Forming characters of Fe_(80)P_(13)C_7 amorphous coating fabricated by bar material plasma spraying;
棒材等离子喷涂法制备Fe_(80)P_(13)C_7非晶态合金涂层的成形特征
3.
Studying of Reactive Plasma Spraying TiN-Al_3Ti-Al Composite Coating;
反应等离子喷涂TiN-Al_3Ti-Al复相陶瓷涂层的研究
3) Plasma Spray
等离子喷涂
1.
Bi-Modal Distribution of Microhardness in Nanostructured AT13-Based Coatings by Plasma Spraying;
等离子喷涂纳米结构AT13基涂层硬度的双态分布
2.
Microstructures of low power plasma sprayed WC-Co cermet coatings;
低功率等离子喷涂WC-Co陶瓷涂层组织
3.
Microstructure and performance of nano-doping Al_2O_3/ZrO_2 plasma spray coatings;
纳米掺杂Al_2O_3/ZrO_2等离子喷涂涂层的组织及性能
4) plasma-sprayed
等离子喷涂
1.
A Review on Plasma-Sprayed Nanostructured Al_2O_3-TiO_2 Ceramic Coatings;
等离子喷涂纳米Al_2O_3-TiO_2陶瓷涂层研究综述
2.
The microstructure and interface of plasma-sprayed Al2O3 ceramic coatings on 45# steel have been investigated by means of x-ray diffraction, scanning electron microscope and microscope sclerometer.
用X射线衍射、扫描电镜和显微硬度计研究了45钢表面等离子喷涂Al2O3陶瓷涂层的微观组织结构、显微硬度,同时对涂层的界面结合特性进行了考察。
3.
TiO2 has been formed on 45# steel surface by Laser-remelting plasma-sprayed coating of nano-SiC powder stuffing.
采用激光重熔等离子喷涂陶瓷涂层技术,以纳米SiC材料为填料,在45钢表面,制备了Al2O3+13%wtT。
5) plasma-spraying
等离子喷涂
1.
Influence of Plasma-spraying Powder Feed Parameters on the Motive Behavior of Powder;
等离子喷涂送粉参量对粉末粒子运动行为的影响分析
2.
The nano Al_2O_3/Ni composite coating was prepared by plasma-spraying method.
将纳米Al2O3颗粒和镍基粉用湿法混合,采用等离子喷涂工艺制备了复合涂层。
3.
The problems present in the study on plasma-spraying nanostructured ceramic coatings were discussed.
从纳米喂料的制备、纳米陶瓷涂层的制备及其结构和特性三方面评述了等离子喷涂纳米陶瓷涂层研究的进展,探讨了等离子喷涂纳米陶瓷涂层研究中存在的主要问题,并展望了等离子喷涂纳米陶瓷涂层的发展前景。
6) plasma-spray
等离子喷涂
1.
Thermal shock resistance of plasma-sprayed SiO_2+ZrO_2 coating;
等离子喷涂SiO_2+ZrO_2涂层的抗热震性能
2.
The influence of additive SiO 2 with different content on the thermal shock resistance of plasma-sprayed Al 2O 3 coating was investigated.
通过在Ａｌ２Ｏ３陶瓷粉末中添加不同数量的ＳｉＯ２，探讨其对等离子喷涂涂层抗热震性的影响。
3.
Thermal bat- teries encased in titanium alloy hardware and single cells built with plasma-sprayed electrodes have been tested independ- ently.
研究了两种提高热电池比能量的方法,分别从以钛合金作为热电池壳体材料和采用等离子喷涂法制备热电池阴极片两个方面来实现。
补充资料：等离子喷涂羟基磷灰石涂层-钛合金人工牙根和髋关节
等离子喷涂羟基磷灰石涂层-钛合金人工牙根和髋关节
等离子喷涂羟基磷灰石涂层一钛合金人 工牙根和髋关节 四Ⅲ联旮走学t枷材利却宽中心{4稿
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条