2) centrifugal flow tundish
离心流动中间包
1.
Electromagnetic stirring technology for tundish——centrifugal flow tundish;
中间包冶金新技术——离心流动中间包
3) Molten Steel Flow
钢液流动
1.
The effect of opening at the bottom of submerged entry nozzle on molten steel flow and temperature distribution in crystallizer;
浸入式水口底部开孔对结晶器内钢液流动和温度分布的影响
2.
According to the actual production condition of RH-MFB in one plant,the coupling mathematic model of molten steel flow and carbon concentration distribution in ladle is established by using the commercial code CFX.
根据某厂RH-MFB的生产实际,采用CFX软件建立钢包内钢液流动与碳浓度分布的耦合数学模型,对钢液的流动特性以及碳浓度的分布情况进行研究,利用现场数据验证所建模型,分析了脱碳后期钢液碳浓度的分布情况,考察了工艺设备等因素对脱碳处理过程的影响,为超低碳钢的工艺优化提供理论依据和指导。
3.
The molten steel flow in slab continuous casting mould and the effect of the nozzle exit inclined angle,immersion depth and casting speed have been introduced,and the flow pattern of molten steel in the curved mould of billet has been generalized as well.
介绍了板坯连铸结晶器中的钢液流动和水口出口倾角、水口浸入深度及浇铸速度等参数对流动行为的影响，同时概括了小方坯弧形结晶器中钢液流动特点。
4) liquid steel flow
钢液流动
1.
Numerical simulation of liquid steel flow and solidification phenomena in slab continuous casting process;
板坯连铸过程中钢液流动与凝固现象的数值模拟
2.
On the basis of experiments,theliquid steel flow velocities were predicted by using mathematical modelling,and the predictions were in good agreement with the m.
在实测基础，利用Ｎａｖｉｅｒ－Ｓｔｏｋｅｓ方程和ｋ－ε紊流模型通过ＳＩＭＰＬＥＲ方法对钢液流动进行了计算，计算结果与实测数据基本相符。
6) Liquid Surface of Pouring Box
中间包液面
补充资料：中间包
tundish：连铸机钢水包和结晶器之间钢水过渡的装置，用来稳定钢流，减小钢流对坯壳的冲刷，以利于非金属夹杂物上浮，从而提高铸坯质量。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条