1) compound graphs (CG)
复合字形
2) font composition
字形合成
3) Complex method
复合形法
1.
Investigation on improvement and application of complex method for discrete variables;
离散复合形法的改进及应用研究
2.
Optimization of gravity revetment of inland waterways by complex method;
复合形法优化内河航道重力式护岸
3.
The diverse complex method based on the maximum quasi-gradient and its application to the slope stability analysis;
基于最大伪梯度搜索的多样复合形法及其在边坡稳定分析中的应用
4) compound forming
复合成形
1.
The research on compound forming law of elliptic hemispheroid part;
椭球形制件复合成形规律的研究
2.
Based on the deformation regularity of drawing-flanging compound forming,the compound forming was controlled effectively by taking certain technical measure.
对直筒形工件的成形工艺方案进行了分析比较,根据拉深-翻孔复合成形的变形规律,通过采取一定的工艺措施,可对复合成形进行有效控制,既可获得所需要的工件形状与尺寸,又能提高材料利用率。
3.
Through analyzing the forming process of the parts, a new_conception and practical compound forming die with simple structure for floating slides was introduced.
通过对工件的成形工艺分析 ,介绍一种构思新颖巧妙 ,结构简洁实用的浮动滑块复合成形模具设计。
5) complex method
复合形
1.
Structure design optimization of the wing based on neural networks and complex method;
基于复合形与神经网络的机翼结构优化设计
2.
To increase the effective width range of SP rolling mill's dies, a crank block was added to the synchronization mechanism and the aggregate kinematics model was built with vector theory, and the model was analyzed with complex method to optimize the length of uniform motion section and length of maximum side pressure of the die.
为了增大SP轧机模块的有效定宽范围,提出在SP轧机同步机构上增加一个曲柄滑块的方法,并利用矢量理论建立了该系统的整体运动学模型,结合复合形寻优技术,以模块匀速段区间长度和最大侧压量为目标函数进行优化分析,使得同步框架匀速段增加了39。
3.
To begin with the integrate shape/size optimization,NASTRAN was used in size optimization,and then the results were transfer to the complex methods which were used to.
采用NASTRAN进行尺寸优化,并将优化结果作为复合形法进行形状优化迭代的根据。
6) Bulging
[英][bʌldʒ] [美][bʌldʒ]
复合胀形
1.
Experiment on Compound Forming of Bulging and Extrusion for Long-Branch Tee Pipe;
长支管T型管接头复合胀形试验
2.
Compound Bulging Forming Technology and Design of Die for Three-Way Pipe of Red Copper;
紫铜等径长支管三通管复合胀形工艺
补充资料：氨合成平衡速率氨平衡合成率
分子式：
CAS号：
性质：又称氨合成平衡速率氨平衡合成率。在不同的催化反应条件下，氨合成反应达到一定程度的化学平衡时氨合成的反应率或合成率。在实际氨合成生产中，不可能达到平衡氨合成率，在工业上设计氨合成塔时，就必须着眼于它的运行能最大限度地接近平衡氨合成率。
CAS号：
性质：又称氨合成平衡速率氨平衡合成率。在不同的催化反应条件下，氨合成反应达到一定程度的化学平衡时氨合成的反应率或合成率。在实际氨合成生产中，不可能达到平衡氨合成率，在工业上设计氨合成塔时，就必须着眼于它的运行能最大限度地接近平衡氨合成率。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条