1) 5A06 aluminum alloy structure
5A06铝合金结构
2) 5A06 aluminium alloy
5A06铝合金
1.
Evaporation loss of Mg element in 5A06 aluminium alloy electron beam welding;
电子束焊接5A06铝合金接头Mg元素蒸发烧损行为分析
2.
Research on process of producing 5A06 aluminium alloy flat ingot by gas furnace melting alloy liquid;
用煤气炉熔化液体料生产5A06铝合金扁锭工艺研究
3.
The effects of processing rate,stabilizing annealing temperature and time on the structures and properties of 5A06 aluminium alloy plate are researched.
研究了加工率、稳定化退火温度及保温时间对5A06铝合金板材组织与性能的影响,确定了5A06铝合金H34状态的生产工艺。
3) 5A06 aluminum alloy
5A06铝合金
1.
Engineering estimation method of 5A06 aluminum alloy's material properties by PDS;
5A06铝合金材料高温热物理参数的工程估算方法
2.
Flow stress behaviors of spray-deposited 5A06 aluminum alloy under hot compression deformation;
喷射沉积5A06铝合金热压缩变形的流变应力行为
3.
Finite element analysis of 5A06 aluminum alloy cyclic pressing deformation and densification;
5A06铝合金楔压变形与致密化的有限元分析
4) 5A06 alloy
5A06铝合金
1.
Distribution of Mg in melt pool and its effects on mechanical properties of seam were investigated in 5A06 alloy electron beam welding(EBW),and influence of welding parameters on evaporation and loss of Mg element was analyzed.
研究了5A06铝合金电子束焊接后熔池内镁元素的分布及其对焊缝硬度的影响,并分析了焊接参数对镁元素烧损行为的影响。
2.
In order to optimize the processing parameter, the sequential motion compacting of spray deposited 5A06 alloy was simulated by using rigid-plastic finite element method(FEM) on DEFORM-3D software.
为优化楔压变形的工艺参数,采用Deform-3D有限元软件对喷射沉积5A06铝合金楔压变形进行了数值模拟。
5) alum alloy 5A06
铝合金5A06
6) aluminum-magnesium alloy(5A06)
5A06铝镁合金
1.
The numerical simulations of the aluminum-magnesium alloy(5A06) flat bottom cylindrical cup’s HDD with double loading paths process were carried out by employing the large non-linear dynamic explicit analytical software ETA/Dynaform5.
5,对5A06铝镁合金平底筒形件的双路径加载充液拉深成形过程进行研究,讨论液室压力变化对零件成形性的影响,以零件成形最终壁厚分布为评定标准,分析不同径向压力加载路径对成形质量的影响。
补充资料：[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式：C16H16ClN3O3S
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条