1) To be worn or eaten away;become corroded.
被啮蚀或磨损;使被腐蚀
2) To be eaten or worn away.
被啮掉或腐蚀掉
3) To gnaw or wear away;erode.
啮蚀，腐蚀啮蚀或磨损;腐蚀
4) corrosive wear
腐蚀磨损
1.
Effect of aging treatment on corrosive wear characteristics of σ strengthening austenite stainless steel;
时效处理对σ相强化奥氏体不锈钢腐蚀磨损特性的影响
2.
Environmental embrittlement of materials in corrosive wear;
腐蚀磨损过程中材料的环境脆性
3.
Investigation on corrosive wear property of nano-Al_2O_3 particles reinforced Ni-based alloying layer
纳米Al_2O_3颗粒增强Ni基复合镀渗合金层的腐蚀磨损性能研究
5) corrosion-wear
腐蚀磨损
1.
A new corrosion-wear resistant alloy for pumps used in hydrometallurgy of zinc and it's heat treatment were studied.
设计了用于湿法炼锌介质环境的新型耐腐蚀磨损合金的化学成分和热处理工艺,通过金相显微镜、电子探针、扫描电镜、腐蚀磨损试验等方法,分析了新型合金的显微组织、磨损形貌,研究了它与对比钢CD-4MCu、常用叶轮材料YL的腐蚀磨损性能。
2.
The characteristics of corrosion-wear of 13Cr-24Mn-0.
44N不锈钢在体液润滑条件下具有良好的抗腐蚀磨损能力,单位时间的磨损量仅为水润滑条件下的25%左右,摩擦因数下降了近30%。
3.
The microstructure,corrosion resistance in acidmedia as well as corrosion-wear behaviors under different impact velocities or in acid media with various densities were investigated for the all laser remelted alloy coatings.
研究了在４５钢表面进行激光熔敷镍基合金、镍基Ｃｒ２Ｏ３合金和镍基ＷＣ合金的熔敷层的组织结构、耐蚀性及不同冲击速度和不同浓度的腐蚀介质下的腐蚀磨损特性。
6) Corrosion-erosion
腐蚀磨损
1.
Corrosion-erosion Resistance of High Chromium Cast Iron Cr28 in Wet Parts of Slurry Pump in Alumina Ore;
氧化铝矿用渣浆泵过流件高铬铸铁Cr28的腐蚀磨损性能
2.
Microstructure and Corrosion-erosion Resistance of Directionally Solidified High Cr Cast Iron;
定向凝固高铬铸铁Cr28的组织和腐蚀磨损性能
3.
The parts of slurry pump which carbides plumbwith working face, is got by using the technology in directional solidification,it make resistance to corrosion-erosion heighten.
分析了材料失重过程中腐蚀磨损的交互作用。
补充资料：啮蚀
1.侵蚀，亏缺。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条