1) compounded rubber
复合橡胶;填料混炼胶
2) pigmented compound
填料混炼胶<橡>
3) compounded rubber
填料混炼胶
4) rubber mixing
橡胶混炼
1.
Thus, this method realizes the full automatic optimizing in rubber mixing process by computer real time control.
首先研究了以橡胶混炼工艺参数为因素，采用区间划分因素的水平，自动确立优化目标和需优化因素的方法。
2.
The instantaneous power control and the MGKJ control system are used to realize the intelectual facultiescontrolled rubber mixing process on single internal mixer including automatic measurement of mix quality on line and automatic optimization of mixing process.
论述了密炼机橡胶混炼工艺智能控制的重要性：自动控制只有智能化才能确保混炼工艺优良，产品质量合格；指出了智能控制的条件、内容和途径：采用瞬时功率控制法及其控制系统ＭＧＫＪ可实现混炼胶质量自动在线检测和混炼工艺自动优化等单台密炼机混炼工艺的智能控制。
3.
The theory of the method of controlling instantaneous power on the mixing technology was composed of the mechanism of the rubber mixing process,the rheologic theory on the internal mixer,and the power curve in mixing process.
橡胶密炼机混炼工艺瞬时功率控制法的理论由３部分组成：橡胶混炼过程的机理、密炼机流变理论和混炼过程功率曲线。
5) dead rubber
缺填料橡胶(混炼不匀现象)
6) rubber filler
橡胶填料
1.
the coupling agent of eater titanate treated the rubber filler was gained by using the pulverization fly ash that surface.
以钛酸酯偶联剂为表面处理剂,对粉煤灰进行表面处理,制得橡胶填料,测试了该填料对橡胶的补强作用。
2.
The author aslo analysed the performance, experimental research, industrial application and economic benefits of modified calcium-magnesium powder instead of PCC as rubber filler.
并对改性钙镁粉代替轻质碳酸钙作橡胶填料的技术性能、试验研究、工业应用及经济效益进行了分析。
3.
Investigations on the Manufacture of both aluminum chloride and rubber filler from coal gangue are carried out on bench and pilot test devices.
在实验室小试、中试装置上进行了从煤矸石制取氯化铝联产橡胶填料的研究，考察了煤矸石性质、工艺条件等对产品质量的影响，结果发现最佳工艺参数为焙烧温度６００～ｑ００℃。
补充资料：混炼胶
分子式：
CAS号：
性质：生胶或塑炼胶按配方与配合剂经炼胶机混炼的胶料叫做混炼胶。混炼胶是制造橡胶制品的坯料，即半成品，故混炼胶的胶态分散质量直接关系到成品的质量，同时混炼胶的黏弹性、流变性则直接影响压延、压出等加工工艺性。
CAS号：
性质：生胶或塑炼胶按配方与配合剂经炼胶机混炼的胶料叫做混炼胶。混炼胶是制造橡胶制品的坯料，即半成品，故混炼胶的胶态分散质量直接关系到成品的质量，同时混炼胶的黏弹性、流变性则直接影响压延、压出等加工工艺性。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条