1) suction boundary layer control
吸除式附面层控制
2) blowing boundary-layer control
吹除式附面层控制
3) boundary layer suction
附面层吸除
1.
An numerical investigation into the effects of boundary layer suction on the off-design performance of a compressor cascade with large camber angles is carried out.
8189)叶栅采用附面层吸除技术后的性能变化。
2.
The numerical simulation of the effects of different suction slot geometries on the performance of compressor cascade when boundary layer suction is applied shows that boundary layer suction reduces the cascade losses significantly, improves the flow conditions and enhances the diffusion.
数值模拟了低速条件下吸气槽道宽度、角度变化对采用附面层吸除技术的大转角扩压叶栅气动性能影响。
3.
The result showed that boundary layer suction (BLS) alleviates the accumulation of low energy fluid at suction surface corners and enhances the ability of flow turning.
结果表明,附面层吸除(BLS)使得吸力面角区低能流体积聚减弱,气流折转能力加强;随稠度增加,叶栅总压损失最高降低分别为32。
4) boundary layer control
附面层控制
1.
Aerodynamic coefficients were measured in the wind tunnel experiments, some different methods of boundary layer control were compared and their characters were described.
试验结果表明 ,采用适当的气动设计与附面层控制相结合 ,可以明显改善升力体的低速气动性能 ,其最大升阻比达到 1 8。
5) wall suction
附面层吸附
1.
By means of it,we reduce the reaction of the rotor and suppress its separate flow and control the 3D separate flow in stator using wall suction.
为了设计高压比高负荷的轴流压气机,本文提出了一种低反动度的设计思想,旨在通过调整基元级反动度的大小控制动叶的附面层分离,在静叶中采取附面层吸附的方法控制三维分离流动。
6) separation control of boundary-layer
附面层分离控制
补充资料：内吸除(见单晶片的吸除技术)
内吸除(见单晶片的吸除技术)
internal gettering
内吸除internal gettering见单晶片的吸除技术。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条